{Ninja-Shell}
Home
Info
Upload
Command
View /etc/passwd
cPanel Reset Password
Filename: //lib/udev/////rules.d//60-persistent-storage.rules
# do not edit this file, it will be overwritten on update # persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path} # scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de> ACTION=="remove", GOTO="persistent_storage_end" ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_end" SUBSYSTEM!="block", GOTO="persistent_storage_end" KERNEL!="loop*|mmcblk*[0-9]|msblk*[0-9]|mspblk*[0-9]|nvme*|sd*|sr*|vd*|xvd*|bcache*|cciss*|dasd*|ubd*|ubi*|scm*|pmem*|nbd*|zd*", GOTO="persistent_storage_end" # ignore partitions that span the entire disk TEST=="whole_disk", GOTO="persistent_storage_end" # For partitions import parent disk ID_* information, except ID_FS_*. # # This is particularly important on media where a filesystem superblock and # partition table are found on the same level, e.g. common Linux distro ISO # installation media. # # In the case where a partition device points to the same filesystem that # was detected on the parent disk, the ID_FS_* information is already # present on the partition devices as well as the parent, so no need to # propagate it. In the case where the partition device points to a different # filesystem, merging the parent ID_FS_ properties would lead to # inconsistencies, so we avoid doing so. ENV{DEVTYPE}=="partition", \ IMPORT{parent}="ID_[!F]*", IMPORT{parent}="ID_", \ IMPORT{parent}="ID_F[!S]*", IMPORT{parent}="ID_F", \ IMPORT{parent}="ID_FS[!_]*", IMPORT{parent}="ID_FS" # NVMe KERNEL=="nvme*[0-9]n*[0-9]", ATTR{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}-part%n" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{wwid}=="?*", ENV{ID_WWN}="$attr{wwid}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{firmware_rev}=="?*", ENV{ID_REVISION}="$attr{firmware_rev}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \ ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{firmware_rev}=="?*", ENV{ID_REVISION}="$attr{firmware_rev}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \ ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}-part%n" # virtio-blk KERNEL=="vd*[!0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}" KERNEL=="vd*[0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n" # ATA KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $devnode" # ATAPI devices (SPC-3 or later) KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode" # Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures) KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $devnode" # Also import properties from usb_id for USB devices KERNEL=="sd*[!0-9]|sr*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" # SCSI devices KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="scsi" KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="cciss" KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}" KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n" # Previously, ata_id in the above might not be able to retrieve attributes correctly, # and properties from usb_id were used as a fallback. See issue #24921 and PR #24923. # To keep backward compatibility, still we need to create symlinks based on USB serial. # See issue #25179. KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_USB_SERIAL}=="?*", SYMLINK+="disk/by-id/usb-$env{ID_USB_SERIAL}" KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_USB_SERIAL}=="?*", SYMLINK+="disk/by-id/usb-$env{ID_USB_SERIAL}-part%n" # PMEM devices KERNEL=="pmem*", ENV{DEVTYPE}=="disk", ATTRS{uuid}=="?*", SYMLINK+="disk/by-id/pmem-$attr{uuid}" # FireWire KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" # MMC KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}" KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ENV{ID_NAME}="$attr{name}" KERNEL=="mmcblk[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}" KERNEL=="mmcblk[0-9]p[0-9]*", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n" # UBI-MTD SUBSYSTEM=="ubi", KERNEL=="ubi*_*", ATTRS{mtd_num}=="*", SYMLINK+="ubi_mtd%s{mtd_num}_%s{name}" # Memstick KERNEL=="msblk[0-9]|mspblk[0-9]", SUBSYSTEMS=="memstick", ATTRS{name}=="?*", ATTRS{serial}=="?*", \ ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}" KERNEL=="msblk[0-9]p[0-9]|mspblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}-part%n" # by-path ENV{DEVTYPE}=="disk", DEVPATH!="*/virtual/*", IMPORT{builtin}="path_id" KERNEL=="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-boot%n" KERNEL!="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}" ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n" # compatible links for ATA devices KERNEL!="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH_ATA_COMPAT}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH_ATA_COMPAT}" ENV{DEVTYPE}=="partition", ENV{ID_PATH_ATA_COMPAT}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH_ATA_COMPAT}-part%n" # legacy virtio-pci by-path links (deprecated) KERNEL=="vd*[!0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}" KERNEL=="vd*[0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}-part%n" # probe filesystem metadata of optical drives which have a media inserted KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", \ IMPORT{builtin}="blkid --offset=$env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}" # single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", \ IMPORT{builtin}="blkid --noraid" # probe filesystem metadata of disks KERNEL!="sr*", IMPORT{builtin}="blkid" # by-label/by-uuid links (filesystem metadata) ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" # by-id (World Wide Name) ENV{DEVTYPE}=="disk", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}" ENV{DEVTYPE}=="partition", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}-part%n" # by-partlabel/by-partuuid links (partition metadata) ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}" LABEL="persistent_storage_end"
./Ninja\.