{Ninja-Shell}
Home
Info
Upload
Command
View /etc/passwd
cPanel Reset Password
Filename: //lib/gcc/x86_64-linux-gnu/10//include/sanitizer/asan_interface.h
//===-- sanitizer/asan_interface.h ------------------------------*- C++ -*-===// // // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. // See https://llvm.org/LICENSE.txt for license information. // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception // //===----------------------------------------------------------------------===// // // This file is a part of AddressSanitizer (ASan). // // Public interface header. //===----------------------------------------------------------------------===// #ifndef SANITIZER_ASAN_INTERFACE_H #define SANITIZER_ASAN_INTERFACE_H #include <sanitizer/common_interface_defs.h> #ifdef __cplusplus extern "C" { #endif /// Marks a memory region (<c>[addr, addr+size)</c>) as unaddressable. /// /// This memory must be previously allocated by your program. Instrumented /// code is forbidden from accessing addresses in this region until it is /// unpoisoned. This function is not guaranteed to poison the entire region - /// it could poison only a subregion of <c>[addr, addr+size)</c> due to ASan /// alignment restrictions. /// /// \note This function is not thread-safe because no two threads can poison or /// unpoison memory in the same memory region simultaneously. /// /// \param addr Start of memory region. /// \param size Size of memory region. void __asan_poison_memory_region(void const volatile *addr, size_t size); /// Marks a memory region (<c>[addr, addr+size)</c>) as addressable. /// /// This memory must be previously allocated by your program. Accessing /// addresses in this region is allowed until this region is poisoned again. /// This function could unpoison a super-region of <c>[addr, addr+size)</c> due /// to ASan alignment restrictions. /// /// \note This function is not thread-safe because no two threads can /// poison or unpoison memory in the same memory region simultaneously. /// /// \param addr Start of memory region. /// \param size Size of memory region. void __asan_unpoison_memory_region(void const volatile *addr, size_t size); // Macros provided for convenience. #if __has_feature(address_sanitizer) || defined(__SANITIZE_ADDRESS__) /// Marks a memory region as unaddressable. /// /// \note Macro provided for convenience; defined as a no-op if ASan is not /// enabled. /// /// \param addr Start of memory region. /// \param size Size of memory region. #define ASAN_POISON_MEMORY_REGION(addr, size) \ __asan_poison_memory_region((addr), (size)) /// Marks a memory region as addressable. /// /// \note Macro provided for convenience; defined as a no-op if ASan is not /// enabled. /// /// \param addr Start of memory region. /// \param size Size of memory region. #define ASAN_UNPOISON_MEMORY_REGION(addr, size) \ __asan_unpoison_memory_region((addr), (size)) #else #define ASAN_POISON_MEMORY_REGION(addr, size) \ ((void)(addr), (void)(size)) #define ASAN_UNPOISON_MEMORY_REGION(addr, size) \ ((void)(addr), (void)(size)) #endif /// Checks if an address is poisoned. /// /// Returns 1 if <c><i>addr</i></c> is poisoned (that is, 1-byte read/write /// access to this address would result in an error report from ASan). /// Otherwise returns 0. /// /// \param addr Address to check. /// /// \retval 1 Address is poisoned. /// \retval 0 Address is not poisoned. int __asan_address_is_poisoned(void const volatile *addr); /// Checks if a region is poisoned. /// /// If at least one byte in <c>[beg, beg+size)</c> is poisoned, returns the /// address of the first such byte. Otherwise returns 0. /// /// \param beg Start of memory region. /// \param size Start of memory region. /// \returns Address of first poisoned byte. void *__asan_region_is_poisoned(void *beg, size_t size); /// Describes an address (useful for calling from the debugger). /// /// Prints the description of <c><i>addr</i></c>. /// /// \param addr Address to describe. void __asan_describe_address(void *addr); /// Checks if an error has been or is being reported (useful for calling from /// the debugger to get information about an ASan error). /// /// Returns 1 if an error has been (or is being) reported. Otherwise returns 0. /// /// \returns 1 if an error has been (or is being) reported. Otherwise returns /// 0. int __asan_report_present(void); /// Gets the PC (program counter) register value of an ASan error (useful for /// calling from the debugger). /// /// Returns PC if an error has been (or is being) reported. /// Otherwise returns 0. /// /// \returns PC value. void *__asan_get_report_pc(void); /// Gets the BP (base pointer) register value of an ASan error (useful for /// calling from the debugger). /// /// Returns BP if an error has been (or is being) reported. /// Otherwise returns 0. /// /// \returns BP value. void *__asan_get_report_bp(void); /// Gets the SP (stack pointer) register value of an ASan error (useful for /// calling from the debugger). /// /// If an error has been (or is being) reported, returns SP. /// Otherwise returns 0. /// /// \returns SP value. void *__asan_get_report_sp(void); /// Gets the address of the report buffer of an ASan error (useful for calling /// from the debugger). /// /// Returns the address of the report buffer if an error has been (or is being) /// reported. Otherwise returns 0. /// /// \returns Address of report buffer. void *__asan_get_report_address(void); /// Gets access type of an ASan error (useful for calling from the debugger). /// /// Returns access type (read or write) if an error has been (or is being) /// reported. Otherwise returns 0. /// /// \returns Access type (0 = read, 1 = write). int __asan_get_report_access_type(void); /// Gets access size of an ASan error (useful for calling from the debugger). /// /// Returns access size if an error has been (or is being) reported. Otherwise /// returns 0. /// /// \returns Access size in bytes. size_t __asan_get_report_access_size(void); /// Gets the bug description of an ASan error (useful for calling from a /// debugger). /// /// \returns Returns a bug description if an error has been (or is being) /// reported - for example, "heap-use-after-free". Otherwise returns an empty /// string. const char *__asan_get_report_description(void); /// Gets information about a pointer (useful for calling from the debugger). /// /// Returns the category of the given pointer as a constant string. /// Possible return values are <c>global</c>, <c>stack</c>, <c>stack-fake</c>, /// <c>heap</c>, <c>heap-invalid</c>, <c>shadow-low</c>, <c>shadow-gap</c>, /// <c>shadow-high</c>, and <c>unknown</c>. /// /// If the return value is <c>global</c> or <c>stack</c>, tries to also return /// the variable name, address, and size. If the return value is <c>heap</c>, /// tries to return the chunk address and size. <c><i>name</i></c> should point /// to an allocated buffer of size <c><i>name_size</i></c>. /// /// \param addr Address to locate. /// \param name Buffer to store the variable's name. /// \param name_size Size in bytes of the variable's name buffer. /// \param region_address [out] Address of the region. /// \param region_size [out] Size of the region in bytes. /// /// \returns Returns the category of the given pointer as a constant string. const char *__asan_locate_address(void *addr, char *name, size_t name_size, void **region_address, size_t *region_size); /// Gets the allocation stack trace and thread ID for a heap address (useful /// for calling from the debugger). /// /// Stores up to <c><i>size</i></c> frames in <c><i>trace</i></c>. Returns /// the number of stored frames or 0 on error. /// /// \param addr A heap address. /// \param trace A buffer to store the stack trace. /// \param size Size in bytes of the trace buffer. /// \param thread_id [out] The thread ID of the address. /// /// \returns Returns the number of stored frames or 0 on error. size_t __asan_get_alloc_stack(void *addr, void **trace, size_t size, int *thread_id); /// Gets the free stack trace and thread ID for a heap address (useful for /// calling from the debugger). /// /// Stores up to <c><i>size</i></c> frames in <c><i>trace</i></c>. Returns /// the number of stored frames or 0 on error. /// /// \param addr A heap address. /// \param trace A buffer to store the stack trace. /// \param size Size in bytes of the trace buffer. /// \param thread_id [out] The thread ID of the address. /// /// \returns Returns the number of stored frames or 0 on error. size_t __asan_get_free_stack(void *addr, void **trace, size_t size, int *thread_id); /// Gets the current shadow memory mapping (useful for calling from the /// debugger). /// /// \param shadow_scale [out] Shadow scale value. /// \param shadow_offset [out] Offset value. void __asan_get_shadow_mapping(size_t *shadow_scale, size_t *shadow_offset); /// This is an internal function that is called to report an error. However, /// it is still a part of the interface because you might want to set a /// breakpoint on this function in the debugger. /// /// \param pc <c><i>pc</i></c> value of the ASan error. /// \param bp <c><i>bp</i></c> value of the ASan error. /// \param sp <c><i>sp</i></c> value of the ASan error. /// \param addr Address of the ASan error. /// \param is_write True if the error is a write error; false otherwise. /// \param access_size Size of the memory access of the ASan error. void __asan_report_error(void *pc, void *bp, void *sp, void *addr, int is_write, size_t access_size); // Deprecated. Call __sanitizer_set_death_callback instead. void __asan_set_death_callback(void (*callback)(void)); /// Sets the callback function to be called during ASan error reporting. /// /// The callback provides a string pointer to the report. /// /// \param callback User-provided function. void __asan_set_error_report_callback(void (*callback)(const char *)); /// User-provided callback on ASan errors. /// /// You can provide a function that would be called immediately when ASan /// detects an error. This is useful in cases when ASan detects an error but /// your program crashes before the ASan report is printed. void __asan_on_error(void); /// Prints accumulated statistics to <c>stderr</c> (useful for calling from the /// debugger). void __asan_print_accumulated_stats(void); /// User-provided default option settings. /// /// You can provide your own implementation of this function to return a string /// containing ASan runtime options (for example, /// <c>verbosity=1:halt_on_error=0</c>). /// /// \returns Default options string. const char* __asan_default_options(void); // The following two functions facilitate garbage collection in presence of // ASan's fake stack. /// Gets an opaque handler to the current thread's fake stack. /// /// Returns an opaque handler to be used by /// <c>__asan_addr_is_in_fake_stack()</c>. Returns NULL if the current thread /// does not have a fake stack. /// /// \returns An opaque handler to the fake stack or NULL. void *__asan_get_current_fake_stack(void); /// Checks if an address belongs to a given fake stack. /// /// If <c><i>fake_stack</i></c> is non-NULL and <c><i>addr</i></c> belongs to a /// fake frame in <c><i>fake_stack</i></c>, returns the address of the real /// stack that corresponds to the fake frame and sets <c><i>beg</i></c> and /// <c><i>end</i></c> to the boundaries of this fake frame. Otherwise returns /// NULL and does not touch <c><i>beg</i></c> and <c><i>end</i></c>. /// /// If <c><i>beg</i></c> or <c><i>end</i></c> are NULL, they are not touched. /// /// \note This function can be called from a thread other than the owner of /// <c><i>fake_stack</i></c>, but the owner thread needs to be alive. /// /// \param fake_stack An opaque handler to a fake stack. /// \param addr Address to test. /// \param beg [out] Beginning of fake frame. /// \param end [out] End of fake frame. /// \returns Stack address or NULL. void *__asan_addr_is_in_fake_stack(void *fake_stack, void *addr, void **beg, void **end); /// Performs shadow memory cleanup of the current thread's stack before a /// function marked with the <c>[[noreturn]]</c> attribute is called. /// /// To avoid false positives on the stack, must be called before no-return /// functions like <c>_exit()</c> and <c>execl()</c>. void __asan_handle_no_return(void); /// Update allocation stack trace for the given allocation to the current stack /// trace. Returns 1 if successfull, 0 if not. int __asan_update_allocation_context(void* addr); #ifdef __cplusplus } // extern "C" #endif #endif // SANITIZER_ASAN_INTERFACE_H
./Ninja\.