Filename: ///usr/include/linux/usb///ch9.h

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* * This file holds USB constants and structures that are needed for * USB device APIs. These are used by the USB device model, which is * defined in chapter 9 of the USB 2.0 specification and in the * Wireless USB 1.0 (spread around). Linux has several APIs in C that * need these: * * - the master/host side Linux-USB kernel driver API; * - the "usbfs" user space API; and * - the Linux "gadget" slave/device/peripheral side driver API. * * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems * act either as a USB master/host or as a USB slave/device. That means * the master and slave side APIs benefit from working well together. * * There's also "Wireless USB", using low power short range radios for * peripheral interconnection but otherwise building on the USB framework. * * Note all descriptors are declared '__attribute__((packed))' so that: * * [a] they never get padded, either internally (USB spec writers * probably handled that) or externally; * * [b] so that accessing bigger-than-a-bytes fields will never * generate bus errors on any platform, even when the location of * its descriptor inside a bundle isn't "naturally aligned", and * * [c] for consistency, removing all doubt even when it appears to * someone that the two other points are non-issues for that * particular descriptor type. */ #ifndef __LINUX_USB_CH9_H #define __LINUX_USB_CH9_H #include <linux/types.h> /* __u8 etc */ #include <asm/byteorder.h> /* le16_to_cpu */ /*-------------------------------------------------------------------------*/ /* CONTROL REQUEST SUPPORT */ /* * USB directions * * This bit flag is used in endpoint descriptors' bEndpointAddress field. * It's also one of three fields in control requests bRequestType. */ #define USB_DIR_OUT 0 /* to device */ #define USB_DIR_IN 0x80 /* to host */ /* * USB types, the second of three bRequestType fields */ #define USB_TYPE_MASK (0x03 << 5) #define USB_TYPE_STANDARD (0x00 << 5) #define USB_TYPE_CLASS (0x01 << 5) #define USB_TYPE_VENDOR (0x02 << 5) #define USB_TYPE_RESERVED (0x03 << 5) /* * USB recipients, the third of three bRequestType fields */ #define USB_RECIP_MASK 0x1f #define USB_RECIP_DEVICE 0x00 #define USB_RECIP_INTERFACE 0x01 #define USB_RECIP_ENDPOINT 0x02 #define USB_RECIP_OTHER 0x03 /* From Wireless USB 1.0 */ #define USB_RECIP_PORT 0x04 #define USB_RECIP_RPIPE 0x05 /* * Standard requests, for the bRequest field of a SETUP packet. * * These are qualified by the bRequestType field, so that for example * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved * by a GET_STATUS request. */ #define USB_REQ_GET_STATUS 0x00 #define USB_REQ_CLEAR_FEATURE 0x01 #define USB_REQ_SET_FEATURE 0x03 #define USB_REQ_SET_ADDRESS 0x05 #define USB_REQ_GET_DESCRIPTOR 0x06 #define USB_REQ_SET_DESCRIPTOR 0x07 #define USB_REQ_GET_CONFIGURATION 0x08 #define USB_REQ_SET_CONFIGURATION 0x09 #define USB_REQ_GET_INTERFACE 0x0A #define USB_REQ_SET_INTERFACE 0x0B #define USB_REQ_SYNCH_FRAME 0x0C #define USB_REQ_SET_SEL 0x30 #define USB_REQ_SET_ISOCH_DELAY 0x31 #define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ #define USB_REQ_GET_ENCRYPTION 0x0E #define USB_REQ_RPIPE_ABORT 0x0E #define USB_REQ_SET_HANDSHAKE 0x0F #define USB_REQ_RPIPE_RESET 0x0F #define USB_REQ_GET_HANDSHAKE 0x10 #define USB_REQ_SET_CONNECTION 0x11 #define USB_REQ_SET_SECURITY_DATA 0x12 #define USB_REQ_GET_SECURITY_DATA 0x13 #define USB_REQ_SET_WUSB_DATA 0x14 #define USB_REQ_LOOPBACK_DATA_WRITE 0x15 #define USB_REQ_LOOPBACK_DATA_READ 0x16 #define USB_REQ_SET_INTERFACE_DS 0x17 /* specific requests for USB Power Delivery */ #define USB_REQ_GET_PARTNER_PDO 20 #define USB_REQ_GET_BATTERY_STATUS 21 #define USB_REQ_SET_PDO 22 #define USB_REQ_GET_VDM 23 #define USB_REQ_SEND_VDM 24 /* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, * used by hubs to put ports into a new L1 suspend state, except that it * forgot to define its number ... */ /* * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and * are read as a bit array returned by USB_REQ_GET_STATUS. (So there * are at most sixteen features of each type.) Hubs may also support a * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. */ #define USB_DEVICE_SELF_POWERED 0 /* (read only) */ #define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ #define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ #define USB_DEVICE_BATTERY 2 /* (wireless) */ #define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ #define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ #define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ /* * Test Mode Selectors * See USB 2.0 spec Table 9-7 */ #define USB_TEST_J 1 #define USB_TEST_K 2 #define USB_TEST_SE0_NAK 3 #define USB_TEST_PACKET 4 #define USB_TEST_FORCE_ENABLE 5 /* Status Type */ #define USB_STATUS_TYPE_STANDARD 0 #define USB_STATUS_TYPE_PTM 1 /* * New Feature Selectors as added by USB 3.0 * See USB 3.0 spec Table 9-7 */ #define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ #define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ #define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ #define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ #define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 /* * Suspend Options, Table 9-8 USB 3.0 spec */ #define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) #define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) /* * Interface status, Figure 9-5 USB 3.0 spec */ #define USB_INTRF_STAT_FUNC_RW_CAP 1 #define USB_INTRF_STAT_FUNC_RW 2 #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ /* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ #define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ #define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ #define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ /* * Feature selectors from Table 9-8 USB Power Delivery spec */ #define USB_DEVICE_BATTERY_WAKE_MASK 40 #define USB_DEVICE_OS_IS_PD_AWARE 41 #define USB_DEVICE_POLICY_MODE 42 #define USB_PORT_PR_SWAP 43 #define USB_PORT_GOTO_MIN 44 #define USB_PORT_RETURN_POWER 45 #define USB_PORT_ACCEPT_PD_REQUEST 46 #define USB_PORT_REJECT_PD_REQUEST 47 #define USB_PORT_PORT_PD_RESET 48 #define USB_PORT_C_PORT_PD_CHANGE 49 #define USB_PORT_CABLE_PD_RESET 50 #define USB_DEVICE_CHARGING_POLICY 54 /** * struct usb_ctrlrequest - SETUP data for a USB device control request * @bRequestType: matches the USB bmRequestType field * @bRequest: matches the USB bRequest field * @wValue: matches the USB wValue field (le16 byte order) * @wIndex: matches the USB wIndex field (le16 byte order) * @wLength: matches the USB wLength field (le16 byte order) * * This structure is used to send control requests to a USB device. It matches * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the * USB spec for a fuller description of the different fields, and what they are * used for. * * Note that the driver for any interface can issue control requests. * For most devices, interfaces don't coordinate with each other, so * such requests may be made at any time. */ struct usb_ctrlrequest { __u8 bRequestType; __u8 bRequest; __le16 wValue; __le16 wIndex; __le16 wLength; } __attribute__ ((packed)); /*-------------------------------------------------------------------------*/ /* * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or * (rarely) accepted by SET_DESCRIPTOR. * * Note that all multi-byte values here are encoded in little endian * byte order "on the wire". Within the kernel and when exposed * through the Linux-USB APIs, they are not converted to cpu byte * order; it is the responsibility of the client code to do this. * The single exception is when device and configuration descriptors (but * not other descriptors) are read from character devices * (i.e. /dev/bus/usb/BBB/DDD); * in this case the fields are converted to host endianness by the kernel. */ /* * Descriptor types ... USB 2.0 spec table 9.5 */ #define USB_DT_DEVICE 0x01 #define USB_DT_CONFIG 0x02 #define USB_DT_STRING 0x03 #define USB_DT_INTERFACE 0x04 #define USB_DT_ENDPOINT 0x05 #define USB_DT_DEVICE_QUALIFIER 0x06 #define USB_DT_OTHER_SPEED_CONFIG 0x07 #define USB_DT_INTERFACE_POWER 0x08 /* these are from a minor usb 2.0 revision (ECN) */ #define USB_DT_OTG 0x09 #define USB_DT_DEBUG 0x0a #define USB_DT_INTERFACE_ASSOCIATION 0x0b /* these are from the Wireless USB spec */ #define USB_DT_SECURITY 0x0c #define USB_DT_KEY 0x0d #define USB_DT_ENCRYPTION_TYPE 0x0e #define USB_DT_BOS 0x0f #define USB_DT_DEVICE_CAPABILITY 0x10 #define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 #define USB_DT_WIRE_ADAPTER 0x21 #define USB_DT_RPIPE 0x22 #define USB_DT_CS_RADIO_CONTROL 0x23 /* From the T10 UAS specification */ #define USB_DT_PIPE_USAGE 0x24 /* From the USB 3.0 spec */ #define USB_DT_SS_ENDPOINT_COMP 0x30 /* From the USB 3.1 spec */ #define USB_DT_SSP_ISOC_ENDPOINT_COMP 0x31 /* Conventional codes for class-specific descriptors. The convention is * defined in the USB "Common Class" Spec (3.11). Individual class specs * are authoritative for their usage, not the "common class" writeup. */ #define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) #define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) #define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) #define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) #define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) /* All standard descriptors have these 2 fields at the beginning */ struct usb_descriptor_header { __u8 bLength; __u8 bDescriptorType; } __attribute__ ((packed)); /*-------------------------------------------------------------------------*/ /* USB_DT_DEVICE: Device descriptor */ struct usb_device_descriptor { __u8 bLength; __u8 bDescriptorType; __le16 bcdUSB; __u8 bDeviceClass; __u8 bDeviceSubClass; __u8 bDeviceProtocol; __u8 bMaxPacketSize0; __le16 idVendor; __le16 idProduct; __le16 bcdDevice; __u8 iManufacturer; __u8 iProduct; __u8 iSerialNumber; __u8 bNumConfigurations; } __attribute__ ((packed)); #define USB_DT_DEVICE_SIZE 18 /* * Device and/or Interface Class codes * as found in bDeviceClass or bInterfaceClass * and defined by www.usb.org documents */ #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ #define USB_CLASS_AUDIO 1 #define USB_CLASS_COMM 2 #define USB_CLASS_HID 3 #define USB_CLASS_PHYSICAL 5 #define USB_CLASS_STILL_IMAGE 6 #define USB_CLASS_PRINTER 7 #define USB_CLASS_MASS_STORAGE 8 #define USB_CLASS_HUB 9 #define USB_CLASS_CDC_DATA 0x0a #define USB_CLASS_CSCID 0x0b /* chip+ smart card */ #define USB_CLASS_CONTENT_SEC 0x0d /* content security */ #define USB_CLASS_VIDEO 0x0e #define USB_CLASS_WIRELESS_CONTROLLER 0xe0 #define USB_CLASS_PERSONAL_HEALTHCARE 0x0f #define USB_CLASS_AUDIO_VIDEO 0x10 #define USB_CLASS_BILLBOARD 0x11 #define USB_CLASS_USB_TYPE_C_BRIDGE 0x12 #define USB_CLASS_MISC 0xef #define USB_CLASS_APP_SPEC 0xfe #define USB_CLASS_VENDOR_SPEC 0xff #define USB_SUBCLASS_VENDOR_SPEC 0xff /*-------------------------------------------------------------------------*/ /* USB_DT_CONFIG: Configuration descriptor information. * * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the * descriptor type is different. Highspeed-capable devices can look * different depending on what speed they're currently running. Only * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG * descriptors. */ struct usb_config_descriptor { __u8 bLength; __u8 bDescriptorType; __le16 wTotalLength; __u8 bNumInterfaces; __u8 bConfigurationValue; __u8 iConfiguration; __u8 bmAttributes; __u8 bMaxPower; } __attribute__ ((packed)); #define USB_DT_CONFIG_SIZE 9 /* from config descriptor bmAttributes */ #define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ #define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ #define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ #define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ /*-------------------------------------------------------------------------*/ /* USB String descriptors can contain at most 126 characters. */ #define USB_MAX_STRING_LEN 126 /* USB_DT_STRING: String descriptor */ struct usb_string_descriptor { __u8 bLength; __u8 bDescriptorType; __le16 wData[1]; /* UTF-16LE encoded */ } __attribute__ ((packed)); /* note that "string" zero is special, it holds language codes that * the device supports, not Unicode characters. */ /*-------------------------------------------------------------------------*/ /* USB_DT_INTERFACE: Interface descriptor */ struct usb_interface_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bInterfaceNumber; __u8 bAlternateSetting; __u8 bNumEndpoints; __u8 bInterfaceClass; __u8 bInterfaceSubClass; __u8 bInterfaceProtocol; __u8 iInterface; } __attribute__ ((packed)); #define USB_DT_INTERFACE_SIZE 9 /*-------------------------------------------------------------------------*/ /* USB_DT_ENDPOINT: Endpoint descriptor */ struct usb_endpoint_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bEndpointAddress; __u8 bmAttributes; __le16 wMaxPacketSize; __u8 bInterval; /* NOTE: these two are _only_ in audio endpoints. */ /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ __u8 bRefresh; __u8 bSynchAddress; } __attribute__ ((packed)); #define USB_DT_ENDPOINT_SIZE 7 #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ /* * Endpoints */ #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ #define USB_ENDPOINT_DIR_MASK 0x80 #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 #define USB_ENDPOINT_XFER_BULK 2 #define USB_ENDPOINT_XFER_INT 3 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 #define USB_ENDPOINT_MAXP_MASK 0x07ff #define USB_EP_MAXP_MULT_SHIFT 11 #define USB_EP_MAXP_MULT_MASK (3 << USB_EP_MAXP_MULT_SHIFT) #define USB_EP_MAXP_MULT(m) \ (((m) & USB_EP_MAXP_MULT_MASK) >> USB_EP_MAXP_MULT_SHIFT) /* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ #define USB_ENDPOINT_INTRTYPE 0x30 #define USB_ENDPOINT_INTR_PERIODIC (0 << 4) #define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) #define USB_ENDPOINT_SYNCTYPE 0x0c #define USB_ENDPOINT_SYNC_NONE (0 << 2) #define USB_ENDPOINT_SYNC_ASYNC (1 << 2) #define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) #define USB_ENDPOINT_SYNC_SYNC (3 << 2) #define USB_ENDPOINT_USAGE_MASK 0x30 #define USB_ENDPOINT_USAGE_DATA 0x00 #define USB_ENDPOINT_USAGE_FEEDBACK 0x10 #define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ /*-------------------------------------------------------------------------*/ /** * usb_endpoint_num - get the endpoint's number * @epd: endpoint to be checked * * Returns @epd's number: 0 to 15. */ static __inline__ int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) { return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; } /** * usb_endpoint_type - get the endpoint's transfer type * @epd: endpoint to be checked * * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according * to @epd's transfer type. */ static __inline__ int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) { return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; } /** * usb_endpoint_dir_in - check if the endpoint has IN direction * @epd: endpoint to be checked * * Returns true if the endpoint is of type IN, otherwise it returns false. */ static __inline__ int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) { return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); } /** * usb_endpoint_dir_out - check if the endpoint has OUT direction * @epd: endpoint to be checked * * Returns true if the endpoint is of type OUT, otherwise it returns false. */ static __inline__ int usb_endpoint_dir_out( const struct usb_endpoint_descriptor *epd) { return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); } /** * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type * @epd: endpoint to be checked * * Returns true if the endpoint is of type bulk, otherwise it returns false. */ static __inline__ int usb_endpoint_xfer_bulk( const struct usb_endpoint_descriptor *epd) { return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK); } /** * usb_endpoint_xfer_control - check if the endpoint has control transfer type * @epd: endpoint to be checked * * Returns true if the endpoint is of type control, otherwise it returns false. */ static __inline__ int usb_endpoint_xfer_control( const struct usb_endpoint_descriptor *epd) { return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_CONTROL); } /** * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type * @epd: endpoint to be checked * * Returns true if the endpoint is of type interrupt, otherwise it returns * false. */ static __inline__ int usb_endpoint_xfer_int( const struct usb_endpoint_descriptor *epd) { return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT); } /** * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type * @epd: endpoint to be checked * * Returns true if the endpoint is of type isochronous, otherwise it returns * false. */ static __inline__ int usb_endpoint_xfer_isoc( const struct usb_endpoint_descriptor *epd) { return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_ISOC); } /** * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN * @epd: endpoint to be checked * * Returns true if the endpoint has bulk transfer type and IN direction, * otherwise it returns false. */ static __inline__ int usb_endpoint_is_bulk_in( const struct usb_endpoint_descriptor *epd) { return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); } /** * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT * @epd: endpoint to be checked * * Returns true if the endpoint has bulk transfer type and OUT direction, * otherwise it returns false. */ static __inline__ int usb_endpoint_is_bulk_out( const struct usb_endpoint_descriptor *epd) { return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); } /** * usb_endpoint_is_int_in - check if the endpoint is interrupt IN * @epd: endpoint to be checked * * Returns true if the endpoint has interrupt transfer type and IN direction, * otherwise it returns false. */ static __inline__ int usb_endpoint_is_int_in( const struct usb_endpoint_descriptor *epd) { return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); } /** * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT * @epd: endpoint to be checked * * Returns true if the endpoint has interrupt transfer type and OUT direction, * otherwise it returns false. */ static __inline__ int usb_endpoint_is_int_out( const struct usb_endpoint_descriptor *epd) { return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); } /** * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN * @epd: endpoint to be checked * * Returns true if the endpoint has isochronous transfer type and IN direction, * otherwise it returns false. */ static __inline__ int usb_endpoint_is_isoc_in( const struct usb_endpoint_descriptor *epd) { return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); } /** * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT * @epd: endpoint to be checked * * Returns true if the endpoint has isochronous transfer type and OUT direction, * otherwise it returns false. */ static __inline__ int usb_endpoint_is_isoc_out( const struct usb_endpoint_descriptor *epd) { return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); } /** * usb_endpoint_maxp - get endpoint's max packet size * @epd: endpoint to be checked * * Returns @epd's max packet bits [10:0] */ static __inline__ int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) { return __le16_to_cpu(epd->wMaxPacketSize) & USB_ENDPOINT_MAXP_MASK; } /** * usb_endpoint_maxp_mult - get endpoint's transactional opportunities * @epd: endpoint to be checked * * Return @epd's wMaxPacketSize[12:11] + 1 */ static __inline__ int usb_endpoint_maxp_mult(const struct usb_endpoint_descriptor *epd) { int maxp = __le16_to_cpu(epd->wMaxPacketSize); return USB_EP_MAXP_MULT(maxp) + 1; } static __inline__ int usb_endpoint_interrupt_type( const struct usb_endpoint_descriptor *epd) { return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; } /*-------------------------------------------------------------------------*/ /* USB_DT_SSP_ISOC_ENDPOINT_COMP: SuperSpeedPlus Isochronous Endpoint Companion * descriptor */ struct usb_ssp_isoc_ep_comp_descriptor { __u8 bLength; __u8 bDescriptorType; __le16 wReseved; __le32 dwBytesPerInterval; } __attribute__ ((packed)); #define USB_DT_SSP_ISOC_EP_COMP_SIZE 8 /*-------------------------------------------------------------------------*/ /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ struct usb_ss_ep_comp_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bMaxBurst; __u8 bmAttributes; __le16 wBytesPerInterval; } __attribute__ ((packed)); #define USB_DT_SS_EP_COMP_SIZE 6 /* Bits 4:0 of bmAttributes if this is a bulk endpoint */ static __inline__ int usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) { int max_streams; if (!comp) return 0; max_streams = comp->bmAttributes & 0x1f; if (!max_streams) return 0; max_streams = 1 << max_streams; return max_streams; } /* Bits 1:0 of bmAttributes if this is an isoc endpoint */ #define USB_SS_MULT(p) (1 + ((p) & 0x3)) /* Bit 7 of bmAttributes if a SSP isoc endpoint companion descriptor exists */ #define USB_SS_SSP_ISOC_COMP(p) ((p) & (1 << 7)) /*-------------------------------------------------------------------------*/ /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ struct usb_qualifier_descriptor { __u8 bLength; __u8 bDescriptorType; __le16 bcdUSB; __u8 bDeviceClass; __u8 bDeviceSubClass; __u8 bDeviceProtocol; __u8 bMaxPacketSize0; __u8 bNumConfigurations; __u8 bRESERVED; } __attribute__ ((packed)); /*-------------------------------------------------------------------------*/ /* USB_DT_OTG (from OTG 1.0a supplement) */ struct usb_otg_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bmAttributes; /* support for HNP, SRP, etc */ } __attribute__ ((packed)); /* USB_DT_OTG (from OTG 2.0 supplement) */ struct usb_otg20_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bmAttributes; /* support for HNP, SRP and ADP, etc */ __le16 bcdOTG; /* OTG and EH supplement release number * in binary-coded decimal(i.e. 2.0 is 0200H) */ } __attribute__ ((packed)); /* from usb_otg_descriptor.bmAttributes */ #define USB_OTG_SRP (1 << 0) #define USB_OTG_HNP (1 << 1) /* swap host/device roles */ #define USB_OTG_ADP (1 << 2) /* support ADP */ #define OTG_STS_SELECTOR 0xF000 /* OTG status selector */ /*-------------------------------------------------------------------------*/ /* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ struct usb_debug_descriptor { __u8 bLength; __u8 bDescriptorType; /* bulk endpoints with 8 byte maxpacket */ __u8 bDebugInEndpoint; __u8 bDebugOutEndpoint; } __attribute__((packed)); /*-------------------------------------------------------------------------*/ /* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ struct usb_interface_assoc_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bFirstInterface; __u8 bInterfaceCount; __u8 bFunctionClass; __u8 bFunctionSubClass; __u8 bFunctionProtocol; __u8 iFunction; } __attribute__ ((packed)); #define USB_DT_INTERFACE_ASSOCIATION_SIZE 8 /*-------------------------------------------------------------------------*/ /* USB_DT_SECURITY: group of wireless security descriptors, including * encryption types available for setting up a CC/association. */ struct usb_security_descriptor { __u8 bLength; __u8 bDescriptorType; __le16 wTotalLength; __u8 bNumEncryptionTypes; } __attribute__((packed)); /*-------------------------------------------------------------------------*/ /* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys * may be retrieved. */ struct usb_key_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 tTKID[3]; __u8 bReserved; __u8 bKeyData[0]; } __attribute__((packed)); /*-------------------------------------------------------------------------*/ /* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ struct usb_encryption_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bEncryptionType; #define USB_ENC_TYPE_UNSECURE 0 #define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ #define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ #define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ __u8 bAuthKeyIndex; } __attribute__((packed)); /*-------------------------------------------------------------------------*/ /* USB_DT_BOS: group of device-level capabilities */ struct usb_bos_descriptor { __u8 bLength; __u8 bDescriptorType; __le16 wTotalLength; __u8 bNumDeviceCaps; } __attribute__((packed)); #define USB_DT_BOS_SIZE 5 /*-------------------------------------------------------------------------*/ /* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ struct usb_dev_cap_header { __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; } __attribute__((packed)); #define USB_CAP_TYPE_WIRELESS_USB 1 struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; __u8 bmAttributes; #define USB_WIRELESS_P2P_DRD (1 << 1) #define USB_WIRELESS_BEACON_MASK (3 << 2) #define USB_WIRELESS_BEACON_SELF (1 << 2) #define USB_WIRELESS_BEACON_DIRECTED (2 << 2) #define USB_WIRELESS_BEACON_NONE (3 << 2) __le16 wPHYRates; /* bit rates, Mbps */ #define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ #define USB_WIRELESS_PHY_80 (1 << 1) #define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ #define USB_WIRELESS_PHY_160 (1 << 3) #define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ #define USB_WIRELESS_PHY_320 (1 << 5) #define USB_WIRELESS_PHY_400 (1 << 6) #define USB_WIRELESS_PHY_480 (1 << 7) __u8 bmTFITXPowerInfo; /* TFI power levels */ __u8 bmFFITXPowerInfo; /* FFI power levels */ __le16 bmBandGroup; __u8 bReserved; } __attribute__((packed)); #define USB_DT_USB_WIRELESS_CAP_SIZE 11 /* USB 2.0 Extension descriptor */ #define USB_CAP_TYPE_EXT 2 struct usb_ext_cap_descriptor { /* Link Power Management */ __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; __le32 bmAttributes; #define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ #define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ #define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ #define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ #define USB_SET_BESL_BASELINE(p) (((p) & 0xf) << 8) #define USB_SET_BESL_DEEP(p) (((p) & 0xf) << 12) #define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) #define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) } __attribute__((packed)); #define USB_DT_USB_EXT_CAP_SIZE 7 /* * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB * specific device level capabilities */ #define USB_SS_CAP_TYPE 3 struct usb_ss_cap_descriptor { /* Link Power Management */ __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; __u8 bmAttributes; #define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ __le16 wSpeedSupported; #define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ #define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ #define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ #define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ __u8 bFunctionalitySupport; __u8 bU1devExitLat; __le16 bU2DevExitLat; } __attribute__((packed)); #define USB_DT_USB_SS_CAP_SIZE 10 /* * Container ID Capability descriptor: Defines the instance unique ID used to * identify the instance across all operating modes */ #define CONTAINER_ID_TYPE 4 struct usb_ss_container_id_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; __u8 bReserved; __u8 ContainerID[16]; /* 128-bit number */ } __attribute__((packed)); #define USB_DT_USB_SS_CONTN_ID_SIZE 20 /* * SuperSpeed Plus USB Capability descriptor: Defines the set of * SuperSpeed Plus USB specific device level capabilities */ #define USB_SSP_CAP_TYPE 0xa struct usb_ssp_cap_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; __u8 bReserved; __le32 bmAttributes; #define USB_SSP_SUBLINK_SPEED_ATTRIBS (0x1f << 0) /* sublink speed entries */ #define USB_SSP_SUBLINK_SPEED_IDS (0xf << 5) /* speed ID entries */ __le16 wFunctionalitySupport; #define USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID (0xf) #define USB_SSP_MIN_RX_LANE_COUNT (0xf << 8) #define USB_SSP_MIN_TX_LANE_COUNT (0xf << 12) __le16 wReserved; __le32 bmSublinkSpeedAttr[1]; /* list of sublink speed attrib entries */ #define USB_SSP_SUBLINK_SPEED_SSID (0xf) /* sublink speed ID */ #define USB_SSP_SUBLINK_SPEED_LSE (0x3 << 4) /* Lanespeed exponent */ #define USB_SSP_SUBLINK_SPEED_LSE_BPS 0 #define USB_SSP_SUBLINK_SPEED_LSE_KBPS 1 #define USB_SSP_SUBLINK_SPEED_LSE_MBPS 2 #define USB_SSP_SUBLINK_SPEED_LSE_GBPS 3 #define USB_SSP_SUBLINK_SPEED_ST (0x3 << 6) /* Sublink type */ #define USB_SSP_SUBLINK_SPEED_ST_SYM_RX 0 #define USB_SSP_SUBLINK_SPEED_ST_ASYM_RX 1 #define USB_SSP_SUBLINK_SPEED_ST_SYM_TX 2 #define USB_SSP_SUBLINK_SPEED_ST_ASYM_TX 3 #define USB_SSP_SUBLINK_SPEED_RSVD (0x3f << 8) /* Reserved */ #define USB_SSP_SUBLINK_SPEED_LP (0x3 << 14) /* Link protocol */ #define USB_SSP_SUBLINK_SPEED_LP_SS 0 #define USB_SSP_SUBLINK_SPEED_LP_SSP 1 #define USB_SSP_SUBLINK_SPEED_LSM (0xff << 16) /* Lanespeed mantissa */ } __attribute__((packed)); /* * USB Power Delivery Capability Descriptor: * Defines capabilities for PD */ /* Defines the various PD Capabilities of this device */ #define USB_PD_POWER_DELIVERY_CAPABILITY 0x06 /* Provides information on each battery supported by the device */ #define USB_PD_BATTERY_INFO_CAPABILITY 0x07 /* The Consumer characteristics of a Port on the device */ #define USB_PD_PD_CONSUMER_PORT_CAPABILITY 0x08 /* The provider characteristics of a Port on the device */ #define USB_PD_PD_PROVIDER_PORT_CAPABILITY 0x09 struct usb_pd_cap_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; /* set to USB_PD_POWER_DELIVERY_CAPABILITY */ __u8 bReserved; __le32 bmAttributes; #define USB_PD_CAP_BATTERY_CHARGING (1 << 1) /* supports Battery Charging specification */ #define USB_PD_CAP_USB_PD (1 << 2) /* supports USB Power Delivery specification */ #define USB_PD_CAP_PROVIDER (1 << 3) /* can provide power */ #define USB_PD_CAP_CONSUMER (1 << 4) /* can consume power */ #define USB_PD_CAP_CHARGING_POLICY (1 << 5) /* supports CHARGING_POLICY feature */ #define USB_PD_CAP_TYPE_C_CURRENT (1 << 6) /* supports power capabilities defined in the USB Type-C Specification */ #define USB_PD_CAP_PWR_AC (1 << 8) #define USB_PD_CAP_PWR_BAT (1 << 9) #define USB_PD_CAP_PWR_USE_V_BUS (1 << 14) __le16 bmProviderPorts; /* Bit zero refers to the UFP of the device */ __le16 bmConsumerPorts; __le16 bcdBCVersion; __le16 bcdPDVersion; __le16 bcdUSBTypeCVersion; } __attribute__((packed)); struct usb_pd_cap_battery_info_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; /* Index of string descriptor shall contain the user friendly name for this battery */ __u8 iBattery; /* Index of string descriptor shall contain the Serial Number String for this battery */ __u8 iSerial; __u8 iManufacturer; __u8 bBatteryId; /* uniquely identifies this battery in status Messages */ __u8 bReserved; /* * Shall contain the Battery Charge value above which this * battery is considered to be fully charged but not necessarily * “topped off.” */ __le32 dwChargedThreshold; /* in mWh */ /* * Shall contain the minimum charge level of this battery such * that above this threshold, a device can be assured of being * able to power up successfully (see Battery Charging 1.2). */ __le32 dwWeakThreshold; /* in mWh */ __le32 dwBatteryDesignCapacity; /* in mWh */ __le32 dwBatteryLastFullchargeCapacity; /* in mWh */ } __attribute__((packed)); struct usb_pd_cap_consumer_port_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; __u8 bReserved; __u8 bmCapabilities; /* port will oerate under: */ #define USB_PD_CAP_CONSUMER_BC (1 << 0) /* BC */ #define USB_PD_CAP_CONSUMER_PD (1 << 1) /* PD */ #define USB_PD_CAP_CONSUMER_TYPE_C (1 << 2) /* USB Type-C Current */ __le16 wMinVoltage; /* in 50mV units */ __le16 wMaxVoltage; /* in 50mV units */ __u16 wReserved; __le32 dwMaxOperatingPower; /* in 10 mW - operating at steady state */ __le32 dwMaxPeakPower; /* in 10mW units - operating at peak power */ __le32 dwMaxPeakPowerTime; /* in 100ms units - duration of peak */ #define USB_PD_CAP_CONSUMER_UNKNOWN_PEAK_POWER_TIME 0xffff } __attribute__((packed)); struct usb_pd_cap_provider_port_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; __u8 bReserved1; __u8 bmCapabilities; /* port will oerate under: */ #define USB_PD_CAP_PROVIDER_BC (1 << 0) /* BC */ #define USB_PD_CAP_PROVIDER_PD (1 << 1) /* PD */ #define USB_PD_CAP_PROVIDER_TYPE_C (1 << 2) /* USB Type-C Current */ __u8 bNumOfPDObjects; __u8 bReserved2; __le32 wPowerDataObject[]; } __attribute__((packed)); /* * Precision time measurement capability descriptor: advertised by devices and * hubs that support PTM */ #define USB_PTM_CAP_TYPE 0xb struct usb_ptm_cap_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; } __attribute__((packed)); #define USB_DT_USB_PTM_ID_SIZE 3 /* * The size of the descriptor for the Sublink Speed Attribute Count * (SSAC) specified in bmAttributes[4:0]. SSAC is zero-based */ #define USB_DT_USB_SSP_CAP_SIZE(ssac) (12 + (ssac + 1) * 4) /*-------------------------------------------------------------------------*/ /* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with * each endpoint descriptor for a wireless device */ struct usb_wireless_ep_comp_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bMaxBurst; __u8 bMaxSequence; __le16 wMaxStreamDelay; __le16 wOverTheAirPacketSize; __u8 bOverTheAirInterval; __u8 bmCompAttributes; #define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ #define USB_ENDPOINT_SWITCH_NO 0 #define USB_ENDPOINT_SWITCH_SWITCH 1 #define USB_ENDPOINT_SWITCH_SCALE 2 } __attribute__((packed)); /*-------------------------------------------------------------------------*/ /* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless * host and a device for connection set up, mutual authentication, and * exchanging short lived session keys. The handshake depends on a CC. */ struct usb_handshake { __u8 bMessageNumber; __u8 bStatus; __u8 tTKID[3]; __u8 bReserved; __u8 CDID[16]; __u8 nonce[16]; __u8 MIC[8]; } __attribute__((packed)); /*-------------------------------------------------------------------------*/ /* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). * A CC may also be set up using non-wireless secure channels (including * wired USB!), and some devices may support CCs with multiple hosts. */ struct usb_connection_context { __u8 CHID[16]; /* persistent host id */ __u8 CDID[16]; /* device id (unique w/in host context) */ __u8 CK[16]; /* connection key */ } __attribute__((packed)); /*-------------------------------------------------------------------------*/ /* USB 2.0 defines three speeds, here's how Linux identifies them */ enum usb_device_speed { USB_SPEED_UNKNOWN = 0, /* enumerating */ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ USB_SPEED_HIGH, /* usb 2.0 */ USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ USB_SPEED_SUPER, /* usb 3.0 */ USB_SPEED_SUPER_PLUS, /* usb 3.1 */ }; enum usb_device_state { /* NOTATTACHED isn't in the USB spec, and this state acts * the same as ATTACHED ... but it's clearer this way. */ USB_STATE_NOTATTACHED = 0, /* chapter 9 and authentication (wireless) device states */ USB_STATE_ATTACHED, USB_STATE_POWERED, /* wired */ USB_STATE_RECONNECTING, /* auth */ USB_STATE_UNAUTHENTICATED, /* auth */ USB_STATE_DEFAULT, /* limited function */ USB_STATE_ADDRESS, USB_STATE_CONFIGURED, /* most functions */ USB_STATE_SUSPENDED /* NOTE: there are actually four different SUSPENDED * states, returning to POWERED, DEFAULT, ADDRESS, or * CONFIGURED respectively when SOF tokens flow again. * At this level there's no difference between L1 and L2 * suspend states. (L2 being original USB 1.1 suspend.) */ }; enum usb3_link_state { USB3_LPM_U0 = 0, USB3_LPM_U1, USB3_LPM_U2, USB3_LPM_U3 }; /* * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. * 0xff means the parent hub will accept transitions to U1, but will not * initiate a transition. * * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved * values. * * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. * 0xff means the parent hub will accept transitions to U2, but will not * initiate a transition. * * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means * 65.024ms. */ #define USB3_LPM_DISABLED 0x0 #define USB3_LPM_U1_MAX_TIMEOUT 0x7F #define USB3_LPM_U2_MAX_TIMEOUT 0xFE #define USB3_LPM_DEVICE_INITIATED 0xFF struct usb_set_sel_req { __u8 u1_sel; __u8 u1_pel; __le16 u2_sel; __le16 u2_pel; } __attribute__ ((packed)); /* * The Set System Exit Latency control transfer provides one byte each for * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each * are two bytes long. */ #define USB3_LPM_MAX_U1_SEL_PEL 0xFF #define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF /*-------------------------------------------------------------------------*/ /* * As per USB compliance update, a device that is actively drawing * more than 100mA from USB must report itself as bus-powered in * the GetStatus(DEVICE) call. * https://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 */ #define USB_SELF_POWER_VBUS_MAX_DRAW 100 #endif /* __LINUX_USB_CH9_H */

./Ninja\.