{Ninja-Shell}

Filename: ///proc/thread-self/root/etc////sensors3.conf

# libsensors configuration file
# -----------------------------
#
# This default configuration file only includes statements which do not
# differ from one mainboard to the next. Only label, compute and set
# statements for internal voltage and temperature sensors are included.
#
# In general, local changes should not be added to this file, but rather
# placed in custom configuration files located in /etc/sensors.d. This
# approach makes further updates much easier.
#
# Such custom configuration files for specific mainboards can be found in
# "configs" directory of lm-sensors package.
#
# Please contribute back a configuration of your board so other users with
# the same hardware won't need to recreate it again and again.

chip "lm78-*" "lm79-*" "lm80-*" "lm96080-*"

label temp1 "M/B Temp"

chip "w83792d-*"

label in0 "VcoreA"
    label in1 "VcoreB"
    label in6 "+5V"
    label in7 "5VSB"
    label in8 "Vbat"

set in6_min  5.0 * 0.90
    set in6_max  5.0 * 1.10
    set in7_min  5.0 * 0.90
    set in7_max  5.0 * 1.10
    set in8_min  3.0 * 0.90
    set in8_max  3.0 * 1.10

chip "w83793-*"

label in0 "VcoreA"
    label in1 "VcoreB"
    label in7 "+5V"
    label in8 "5VSB"
    label in9 "Vbat"

set in7_min  5.0 * 0.90
    set in7_max  5.0 * 1.10
    set in8_min  5.0 * 0.90
    set in8_max  5.0 * 1.10
    set in9_min  3.0 * 0.90
    set in9_max  3.0 * 1.10

chip "w83795g-*" "w83795adg-*"

label in12 "+3.3V"
    label in13 "3VSB"
    label in14 "Vbat"

set in12_min  3.3 * 0.90
    set in12_max  3.3 * 1.10
    set in13_min  3.3 * 0.90
    set in13_max  3.3 * 1.10
    set in14_min  3.0 * 0.90
    set in14_max  3.3 * 1.10

chip "via686a-*"

label in0 "Vcore"
    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
    set in4_min 12.0 * 0.90
    set in4_max 12.0 * 1.10

chip "adm1025-*" "ne1619-*"

label in1 "Vcore"
    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"
    label in5 "VCC"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
    set in5_min  3.3 * 0.90
    set in5_max  3.3 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
#    set in4_min 12.0 * 0.90
#    set in4_max 12.0 * 1.10

label temp1 "CPU Temp"
    label temp2 "M/B Temp"

chip "lm87-*" "adm1024-*"

label in1 "Vcore"
    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
    set in4_min 12.0 * 0.90
    set in4_max 12.0 * 1.10

label temp1 "M/B Temp"
    label temp2 "CPU Temp"

chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"

label in8 "Vbat"

chip "fscpos-*" "fscher-*"
#FSC "Hermes"

label in0 "+12V"
    label in1 "+5V"
    label in2 "Vbat"

label temp1 "CPU Temp"
    label temp2 "M/B Temp"
    label temp3 "Aux Temp"

chip "fscscy-*"
#FSC "Scylla"

label in0 "+12V"
    label in1 "+5V"
    label in2 "+3.3V"

label temp1 "CPU0 Temp"
    label temp2 "CPU1 Temp"
    label temp3 "M/B Temp"
    label temp4 "Aux Temp"

chip "fschds-*"
# Fujitsu Technology Solutions, "Hades"-Chip

# Temperatures
    label temp1 "CPU Temp"
    label temp2 "Super I/O Temp"
    label temp3 "System Temp"

# Fans
    label fan1 "PSU Fan"
    label fan2 "CPU Fan"
    label fan3 "System FAN2"
    label fan4 "System FAN3"
    label fan5 "System FAN4"

# Voltages
    label in0 "+12V"
    label in1 "+5V"
    label in2 "Vbat"

chip "fscsyl-*"
# Fujitsu Technology Solutions, "Syleus"-Chip

# Temperatures
    label temp1 "CPU Temp"
    label temp4 "Super I/O Temp"
    label temp5 "Northbridge Temp"

# Fans
    label fan1 "CPU Fan"
    label fan2 "System FAN2"
    label fan3 "System FAN3"
    label fan4 "System FAN4"
    label fan7 "PSU Fan"

# Voltages
    label in0 "+12V"
    label in1 "+5V"
    label in2 "Vbat"
    label in3 "+3.3V"
    label in5 "+3.3V-Aux"

chip "vt1211-*"

label in5 "+3.3V"

label temp2 "SIO Temp"

chip "vt8231-*"

label in5 "+3.3V"

chip "smsc47m192-*"

label in1 "Vcore"
    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"
    label in5 "VCC"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
    set in4_min 12.0 * 0.90
    set in4_max 12.0 * 1.10
    set in5_min  3.3 * 0.90
    set in5_max  3.3 * 1.10

label temp1 "SIO Temp"

chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" \
     "emc6d100-*" "emc6d102-*" "emc6d103-*" "emc6d103s-*"

label in1 "Vcore"
    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
#    set in4_min 12.0 * 0.90
#    set in4_max 12.0 * 1.10

label temp2 "M/B Temp"

chip "emc6w201-*"

label in2 "+3.3V"
    label in3 "+5V"

label temp6 "M/B Temp"

chip "pc87365-*" "pc87366-*"

# Voltage inputs

label in7 "3VSB"
    label in8 "VDD"
    label in9 "Vbat"
    label in10 "AVDD"

compute in7   @*2, @/2
    compute in8   @*2, @/2
    compute in10  @*2, @/2

# These are the operating conditions as recommended by National
# Semiconductor
    set in7_min   3.0
    set in7_max   3.6
    set in8_min   3.0
    set in8_max   3.6
    set in10_min  3.0
    set in10_max  3.6
# Depending on the hardware setup, the battery voltage may or may not
# be monitored.
#    set in9_min   2.4
#    set in9_max   3.6

label temp3 "SIO Temp"

set temp3_min    0
    set temp3_max   70
    set temp3_crit  85

chip "adm1030-*" "adm1031-*"

label temp1 "M/B Temp"

chip "w83627thf-*"

label in3 "+5V"
    label in7 "5VSB"
    label in8 "Vbat"

# Internal resistors
    compute in3  @ * (1 + 34/51), @ / (1 + 34/51)
    compute in7  @ * (1 + 34/51), @ / (1 + 34/51)

set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
    set in7_min  5.0 * 0.90
    set in7_max  5.0 * 1.10
# The battery voltage may or may not be monitored.
#    set in8_min  3.0 * 0.90
#    set in8_max  3.0 * 1.10

chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*" \
     "nct6779-*" "nct6791-*" "nct6795-*" "nct6796-*"

label in0 "Vcore"
    label in2 "AVCC"
    label in3 "+3.3V"
    label in7 "3VSB"
    label in8 "Vbat"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  3.3 * 0.90
    set in3_max  3.3 * 1.10
    set in7_min  3.3 * 0.90
    set in7_max  3.3 * 1.10
    set in8_min  3.0 * 0.90
    set in8_max  3.3 * 1.10

chip "w83627uhg-*"

label in2 "AVCC"
    label in3 "+5V"
    label in7 "5VSB"
    label in8 "Vbat"

set in2_min  5.0 * 0.90
    set in2_max  5.0 * 1.10
    set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
    set in7_min  5.0 * 0.90
    set in7_max  5.0 * 1.10
    set in8_min  3.0 * 0.90
    set in8_max  3.3 * 1.10

chip "f71805f-*"

label in0 "+3.3V"

set in0_min  3.3 * 0.90
    set in0_max  3.3 * 1.10

chip "f71872f-*"

label in0 "+3.3V"
    label in9 "Vbat"
    label in10 "3VSB"

set in0_min   3.3 * 0.90
    set in0_max   3.3 * 1.10
    set in9_min   3.0 * 0.90
    set in9_max   3.0 * 1.10
    set in10_min  3.3 * 0.90
    set in10_max  3.3 * 1.10

chip "k8temp-*"

label temp1 "Core0 Temp"
    label temp2 "Core0 Temp"
    label temp3 "Core1 Temp"
    label temp4 "Core1 Temp"

chip "dme1737-*"

label in0 "5VSB"
    label in1 "Vcore"
    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"
    label in5 "3VSB"
    label in6 "Vbat"

label temp2 "SIO Temp"

set in0_min  5.0 * 0.90
    set in0_max  5.0 * 1.10
    set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
    set in4_min 12.0 * 0.90
    set in4_max 12.0 * 1.10
    set in5_min  3.3 * 0.90
    set in5_max  3.3 * 1.10
    set in6_min  3.0 * 0.90
    set in6_max  3.0 * 1.10

chip "sch311x-*"

label in1 "Vcore"
    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"
    label in5 "3VSB"
    label in6 "Vbat"

label temp2 "SIO Temp"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
    set in4_min 12.0 * 0.90
    set in4_max 12.0 * 1.10
    set in5_min  3.3 * 0.90
    set in5_max  3.3 * 1.10
    set in6_min  3.0 * 0.90
    set in6_max  3.0 * 1.10

chip "sch5027-*"

label in0 "5VSB"
    label in1 "Vcore"
    label in2 "+3.3V"
    label in5 "3VSB"
    label in6 "Vbat"

label temp2 "SIO Temp"

set in0_min  5.0 * 0.90
    set in0_max  5.0 * 1.10
    set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in5_min  3.3 * 0.90
    set in5_max  3.3 * 1.10
    set in6_min  3.0 * 0.90
    set in6_max  3.0 * 1.10

chip "sch5127-*"

label in2 "+3.3V"
    label in5 "3VSB"
    label in6 "Vbat"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in5_min  3.3 * 0.90
    set in5_max  3.3 * 1.10
    set in6_min  3.0 * 0.90
    set in6_max  3.0 * 1.10

chip "f71808e-*" "f71808a-*" "f71862fg-*" "f71869-*" "f71869a-*" "f71882fg-*" \
     "f71889fg-*" "f71889ed-*" "f71889a-*"

label in0 "+3.3V"
    label in7 "3VSB"
    label in8 "Vbat"

compute in0  @*2, @/2
    compute in7  @*2, @/2
    compute in8  @*2, @/2

chip "f71858fg-*" "f8000-*"

label in0 "+3.3V"
    label in1 "3VSB"
    label in2 "Vbat"

compute in0  @*2, @/2
    compute in1  @*2, @/2
    compute in2  @*2, @/2

chip "f71868a-*"

label in0 "+3.3V"
    label in7 "3VSB"
    label in8 "Vbat"
    label in9 "5VSB"

compute in0  @*2, @/2
    compute in7  @*2, @/2
    compute in8  @*2, @/2
    compute in9  @*3, @/3

chip "f81865f-*"

label in0 "+3.3V"
    label in5 "3VSB"
    label in6 "Vbat"

compute in0  @*2, @/2
    compute in5  @*2, @/2
    compute in6  @*2, @/2

chip "adt7473-*" "adt7475-*"

label in2 "+3.3V"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10

label temp2 "Board Temp"

chip "adt7476-*" "adt7490-*"

label in1 "Vcore"
    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"

set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  5.0 * 0.90
    set in3_max  5.0 * 1.10
# Depending on how your ADT7476 is hardwired, you may or may not have
# +12V readings.
#    set in4_min 12.0 * 0.90
#    set in4_max 12.0 * 1.10

label temp2 "M/B Temp"

./Ninja\.