{Ninja-Shell}
Home
Info
Upload
Command
View /etc/passwd
cPanel Reset Password
Filename: //proc/self/root////usr/share////doc//socat///socat-openssltunnel.html
<!-- $Revision: 1.1 $ $Date: 2007/03/06 20:54:43 $ --> <html><head> <title>Securing Traffic Between two Socat Instances Using SSL</title> <link rel="stylesheet" type="text/css" href="dest-unreach.css"> </head> <body> <h1>Securing Traffic Between two Socat Instances Using SSL</h1> <h2>Introduction</h2> <p> When you want to connect two socat processes running on different machines and feel that you need to protect the connection against unauthorized access, sniffing, data manipulation etc., you might want to encrypt the communications. </p> <p> For this purpose socat integrates the OpenSSL library and provides SSL client and server features. </p> <p> SSL is a complex protocol that provides much more features than required for protecting a single connection; in this document we present only a simple scenario that provides just the basic security requirements. </p> <!-- discussion --> <h2>Configuring OpenSSL in socat</h2> <p> This section shows how the SSL addresses can be configured in socat. In this docu we only use self signed certificates for the sake of simplicity. </p> <p>We assume that the server host is called <tt>server.domain.org</tt> and the server process uses port 4433. To keep it simple, we use a very simple server funtionality that just echos data (<tt>echo</tt>), and <tt>stdio</tt> on the client.</p> <h3>Generate a server certificate</h3> <p>Perform the following steps on a trusted host where OpenSSL is installed. It might as well be the client or server host themselves.</p> <p>Prepare a basename for the files related to the server certificate:</p> <span class="frame"><span class="shell">FILENAME=server</span></span> <p>Generate a public/private key pair:</p> <span class="frame"><span class="shell">openssl genrsa -out $FILENAME.key 1024</span></span> <p>Generate a self signed certificate:</p> <span class="frame"><span class="shell"> openssl req -new -key $FILENAME.key -x509 -days 3653 -out $FILENAME.crt</span></span> <p>You will be prompted for your country code, name etc.; you may quit all prompts with the enter key.</p> <p>Generate the PEM file by just appending the key and certificate files:<p> <span class="frame"><span class="shell">cat $FILENAME.key $FILENAME.crt >$FILENAME.pem</span></span> <p>The files that contain the private key should be kept secret, thus adapt their permissions:<p> <span class="frame"><span class="shell">chmod 600 $FILENAME.key $FILENAME.pem</span></span> <p>Now bring the file <tt>server.pem</tt> to the SSL server, e.g. to directory <tt>$HOME/etc/</tt>, using a secure channel like USB memory stick or SSH. Keep tight permissions on the file even on the target host, and remove all other instances of <tt>server.key</tt> and <tt>server.pem</tt>. </p> <p>Copy the trust certificate server.crt to the SSL client host, e.g. to directory <tt>$HOME/etc/</tt>; a secure channel is not required here, and the permissions are not critical. </p> <h3>Generate a client certificate</h3> <p>First prepare a different basename for the files related to the client certificate:</p> <span class="frame"><span class="shell">FILENAME=client</span></span> <p>Repeat the procedure for certificate generation described above. Copy <tt>client.pem</tt> to the SSL client, and <tt>client.crt</tt> to the server.</p> <h3>OpenSSL Server</h3> <p>Instead of using a tcp-listen (tcp-l) address, we use openssl-listen (ssl-l) for the server, <tt>cert=...</tt> tells the program to the file containing its ceritificate and private key, and <tt>cafile=...</tt> points to the file containing the certificate of the peer; we trust clients only if they can proof that they have the related private key (OpenSSL handles this for us):<p> <span class="frame"><span class="shell">socat openssl-listen:4433,reuseaddr,cert=$HOME/etc/server.pem,cafile=$HOME/etc/client.crt echo</span></span> <p>After starting this command, socat should be listening on port 4433, but will require client authentication.</p> <h3>OpenSSL Client</h3> <p>Substitute your <tt>tcp-connect</tt> or <tt>tcp</tt> address keyword with <tt>openssl-connect</tt> or just <tt>ssl</tt> and here too add the <tt>cert</tt> and <tt>cafile</tt> options:<p> <span class="frame"><span class="shell">socat stdio openssl-connect:server.domain.org:4433,cert=$HOME/etc/client.pem,cafile=$HOME/etc/server.crt</span></span> <p>This command should establish a secured connection to the server process.</p> <h3>TCP/IP version 6</h3> <p>If the communication is to go over IPv6, the above described commands have to be adapted; <tt>ip6name.domain.org</tt> is assumed to resolve to the IPv6 address of the server:</p> <p>Server:</p> <span class="frame"><span class="shell">socat openssl-listen:4433,<b style="color:yellow">pf=ip6</b>,reuseaddr,cert=$HOME/etc/server.pem,cafile=$HOME/etc/client.crt echo</span></span> <p>Client:</p> <span class="frame"><span class="shell">socat stdio openssl-connect:<b style="color:yellow">ip6name</b>.domain.org:4433,cert=$HOME/etc/client.pem,cafile=$HOME/etc/server.crt</span></span> <h2>Troubleshooting</h2> <h3>Test OpenSSL Integration</h3> <p> If you get error messages like this:</p> <table border="1" bgcolor="#e08080"><tr><td><tt>... E unknown device/address "openssl-listen"</tt></td></tr></table> <p>your socat executable probably does not have the OpenSSL library linked in. Check socat's compile time configuration with the following command:</p> <span class="frame"><span class="shell">socat -V |grep SSL</span></span> <p>Positive output: <tt>#define WITH_OPENSSL 1</tt><br> Negative output: <tt>#undef WITH_OPENSSL</tt><br> </p> <p> In the latter case, make sure you have OpenSSL and its development package (include files) installed, and check the run of the configure script. </p> <h2>History</h2> <p> A first OpenSSL client was implemented in socat 1.2.0; it did not support client certificates and could not verify server certificates. It was rather considered as a tool for probing typical SSL secured Internet services. </p> <p> From version 1.4.0 on, socat provided experimental support for SSL client and SSL server, implemented using the OpenSSL libraries. Only TCP/IPv4 transport was supported. With both SSL client and server, trust certificates for checking the peers authentication, and certificates for authentication could be specified. This allowed for non interactive secure connection establishing. The features were considered experimental; like most Internet sites, socat server did not require the client to present a certificate per default, but the client required a server certificate. </p> <p> DSA certificate support is implemented since version 1.4.2. </p> <p> Socat version 1.5.0 extended SSL to TCP/IPv6 transports. </p> <p> With socat version 1.6.0, the SSL server per default requires the client to present a trusted certificate. socat's OpenSSL implementation still does not check the contents of a certificate like host name or host address. </p> <p>This document was last modified in March 2007.</p> <h2>More info about socat OpenSSL</h2> <h3>Links regarding this tutorial</h3> <a href="socat.html#ADDRESS_OPENSSL_CONNECT">address openssl-connect</a><br> <a href="socat.html#ADDRESS_OPENSSL_LISTEN">address openssl-listen</a><br> <a href="socat.html#OPTION_OPENSSL_CERTIFICATE">option cert</a><br> <a href="socat.html#OPTION_OPENSSL_CAFILE">option cafile</a><br> <h3>More socat options for OpenSSL addresses</h3> <a href="socat.html#GROUP_OPENSSL">OpenSSL options</a><br> <a href="socat.html#GROUP_TCP">TCP options</a><br> <a href="socat.html#GROUP_IP">IP options</a><br> <a href="socat.html#GROUP_SOCKET">socket options</a><br> <a href="socat.html#GROUP_FD">file descriptor options</a><br> <a href="socat.html#GROUP_RETRY">retry options</a><br> <p>For openssl-listen only:</p> <a href="socat.html#GROUP_LISTEN">listen options</a><br> <a href="socat.html#GROUP_CHILD">child options</a><br> <a href="socat.html#GROUP_RANGE">range options</a><br> <h2>References</h2> <a href="http://www.dest-unreach.org/socat">socat home page</a><br> <a href="socat.html">socat man page</a><br> <a href="http://www.openssl.org/">OpenSSL home page</a><br> <a href="http://www.stunnel.org/">stunnel home page</a><br> <a href="http://en.wikipedia.org/wiki/Secure_Sockets_Layer">secure sockets layer on Wikipedia</a><br> <p> <small>Copyright: Gerhard Rieger 2007</small><br> <small>License: <a href="http://www.fsf.org/licensing/licenses/fdl.html">GNU Free Documentation License (FDL)</a></small> </p> </body> </html>
./Ninja\.