Filename: ///proc/thread-self////root///etc/apparmor.d/usr.sbin.chronyd

# Last Modified: Sat Jan 20 10:45:05 2018 #include <tunables/global> /usr/sbin/chronyd flags=(attach_disconnected) { #include <abstractions/base> #include <abstractions/nameservice> # For /run/chrony to be created capability chown, # Give “root” the ability to read and write the PID file capability dac_override, capability dac_read_search, # Needed to support HW timestamping capability net_admin, # Needed to allow NTP server sockets to be bound to a privileged port capability net_bind_service, # Needed to allow an NTP socket to be bound to a device using the # SO_BINDTODEVICE socket option on kernels before 5.7 capability net_raw, # Needed to drop privileges capability setgid, capability setuid, # Needed to set the SCHED_FIFO real-time scheduler at the specified priority # using the '-P' option capability sys_nice, # Needed to lock chronyd into RAM capability sys_resource, # Needed to set the system/real-time clock capability sys_time, /usr/sbin/chronyd mr, /etc/chrony/{,**} r, /var/lib/chrony/{,*} rw, /var/log/chrony/{,*} rw, @{run}/chrony/{,*} rw, @{run}/chrony-dhcp/{,*} r, # Using the “tempcomp” directive gives chronyd the ability to improve # the stability and accuracy of the clock by compensating the temperature # changes measured by a sensor close to the oscillator. @{sys}/class/hwmon/hwmon[0-9]*/temp[0-9]*_input r, @{sys}/devices/virtual/thermal/thermal_zone[0-9]*/hwmon[0-9]*/temp[0-9]*_input r, # Support all paths suggested in the man page (LP: #1771028). Assume these # are common use cases; others should be set as local include (see below). # Configs using a 'chrony.' prefix like the tempcomp config file example /etc/chrony.* r, # Example gpsd socket is outside @{run}/chrony/ @{run}/chrony.tty{,*}.sock rw, # To sign replies to MS-SNTP clients by the smbd daemon /var/lib/samba/ntp_signd/socket rw, # rtc /etc/adjtime r, /dev/rtc{,[0-9]*} rw, # gps devices /dev/pps[0-9]* rw, /dev/ptp[0-9]* rw, # Allow reading the chronyd configuration file that timemaster(8) generates @{run}/timemaster/chrony.conf r, # For use with clocks that report via shared memory (e.g. gpsd), # you may need to give ntpd access to all of shared memory, though # this can be considered dangerous. See https://launchpad.net/bugs/722815 # for details. To enable, add this to local/usr.sbin.chronyd: # capability ipc_owner, # Site-specific additions and overrides. See local/README for details. #include <local/usr.sbin.chronyd> }

./Ninja\.