Filename: ///usr//include////linux/wireless.h

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* * This file define a set of standard wireless extensions * * Version : 22 16.3.07 * * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. */ #ifndef _LINUX_WIRELESS_H #define _LINUX_WIRELESS_H /************************** DOCUMENTATION **************************/ /* * Initial APIs (1996 -> onward) : * ----------------------------- * Basically, the wireless extensions are for now a set of standard ioctl * call + /proc/net/wireless * * The entry /proc/net/wireless give statistics and information on the * driver. * This is better than having each driver having its entry because * its centralised and we may remove the driver module safely. * * Ioctl are used to configure the driver and issue commands. This is * better than command line options of insmod because we may want to * change dynamically (while the driver is running) some parameters. * * The ioctl mechanimsm are copied from standard devices ioctl. * We have the list of command plus a structure descibing the * data exchanged... * Note that to add these ioctl, I was obliged to modify : * # net/core/dev.c (two place + add include) * # net/ipv4/af_inet.c (one place + add include) * * /proc/net/wireless is a copy of /proc/net/dev. * We have a structure for data passed from the driver to /proc/net/wireless * Too add this, I've modified : * # net/core/dev.c (two other places) * # include/linux/netdevice.h (one place) * # include/linux/proc_fs.h (one place) * * New driver API (2002 -> onward) : * ------------------------------- * This file is only concerned with the user space API and common definitions. * The new driver API is defined and documented in : * # include/net/iw_handler.h * * Note as well that /proc/net/wireless implementation has now moved in : * # net/core/wireless.c * * Wireless Events (2002 -> onward) : * -------------------------------- * Events are defined at the end of this file, and implemented in : * # net/core/wireless.c * * Other comments : * -------------- * Do not add here things that are redundant with other mechanisms * (drivers init, ifconfig, /proc/net/dev, ...) and with are not * wireless specific. * * These wireless extensions are not magic : each driver has to provide * support for them... * * IMPORTANT NOTE : As everything in the kernel, this is very much a * work in progress. Contact me if you have ideas of improvements... */ /***************************** INCLUDES *****************************/ #include <linux/types.h> /* for __u* and __s* typedefs */ #include <linux/socket.h> /* for "struct sockaddr" et al */ #include <linux/if.h> /* for IFNAMSIZ and co... */ # include <stddef.h> /* for offsetof */ /***************************** VERSION *****************************/ /* * This constant is used to know the availability of the wireless * extensions and to know which version of wireless extensions it is * (there is some stuff that will be added in the future...) * I just plan to increment with each new version. */ #define WIRELESS_EXT 22 /* * Changes : * * V2 to V3 * -------- * Alan Cox start some incompatibles changes. I've integrated a bit more. * - Encryption renamed to Encode to avoid US regulation problems * - Frequency changed from float to struct to avoid problems on old 386 * * V3 to V4 * -------- * - Add sensitivity * * V4 to V5 * -------- * - Missing encoding definitions in range * - Access points stuff * * V5 to V6 * -------- * - 802.11 support (ESSID ioctls) * * V6 to V7 * -------- * - define IW_ESSID_MAX_SIZE and IW_MAX_AP * * V7 to V8 * -------- * - Changed my e-mail address * - More 802.11 support (nickname, rate, rts, frag) * - List index in frequencies * * V8 to V9 * -------- * - Support for 'mode of operation' (ad-hoc, managed...) * - Support for unicast and multicast power saving * - Change encoding to support larger tokens (>64 bits) * - Updated iw_params (disable, flags) and use it for NWID * - Extracted iw_point from iwreq for clarity * * V9 to V10 * --------- * - Add PM capability to range structure * - Add PM modifier : MAX/MIN/RELATIVE * - Add encoding option : IW_ENCODE_NOKEY * - Add TxPower ioctls (work like TxRate) * * V10 to V11 * ---------- * - Add WE version in range (help backward/forward compatibility) * - Add retry ioctls (work like PM) * * V11 to V12 * ---------- * - Add SIOCSIWSTATS to get /proc/net/wireless programatically * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space * - Add new statistics (frag, retry, beacon) * - Add average quality (for user space calibration) * * V12 to V13 * ---------- * - Document creation of new driver API. * - Extract union iwreq_data from struct iwreq (for new driver API). * - Rename SIOCSIWNAME as SIOCSIWCOMMIT * * V13 to V14 * ---------- * - Wireless Events support : define struct iw_event * - Define additional specific event numbers * - Add "addr" and "param" fields in union iwreq_data * - AP scanning stuff (SIOCSIWSCAN and friends) * * V14 to V15 * ---------- * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg * - Make struct iw_freq signed (both m & e), add explicit padding * - Add IWEVCUSTOM for driver specific event/scanning token * - Add IW_MAX_GET_SPY for driver returning a lot of addresses * - Add IW_TXPOW_RANGE for range of Tx Powers * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points * - Add IW_MODE_MONITOR for passive monitor * * V15 to V16 * ---------- * - Increase the number of bitrates in iw_range to 32 (for 802.11g) * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) * - Reshuffle struct iw_range for increases, add filler * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index * * V16 to V17 * ---------- * - Add flags to frequency -> auto/fixed * - Document (struct iw_quality *)->updated, add new flags (INVALID) * - Wireless Event capability in struct iw_range * - Add support for relative TxPower (yick !) * * V17 to V18 (From Jouni Malinen <j@w1.fi>) * ---------- * - Add support for WPA/WPA2 * - Add extended encoding configuration (SIOCSIWENCODEEXT and * SIOCGIWENCODEEXT) * - Add SIOCSIWGENIE/SIOCGIWGENIE * - Add SIOCSIWMLME * - Add SIOCSIWPMKSA * - Add struct iw_range bit field for supported encoding capabilities * - Add optional scan request parameters for SIOCSIWSCAN * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA * related parameters (extensible up to 4096 parameter values) * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND * * V18 to V19 * ---------- * - Remove (struct iw_point *)->pointer from events and streams * - Remove header includes to help user space * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros * * V19 to V20 * ---------- * - RtNetlink requests support (SET/GET) * * V20 to V21 * ---------- * - Remove (struct net_device *)->get_wireless_stats() * - Change length in ESSID and NICK to strlen() instead of strlen()+1 * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers * - Power/Retry relative values no longer * 100000 * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI * * V21 to V22 * ---------- * - Prevent leaking of kernel space in stream on 64 bits. */ /**************************** CONSTANTS ****************************/ /* -------------------------- IOCTL LIST -------------------------- */ /* Wireless Identification */ #define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ #define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ /* SIOCGIWNAME is used to verify the presence of Wireless Extensions. * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... * Don't put the name of your driver there, it's useless. */ /* Basic operations */ #define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ #define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ #define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ #define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ #define SIOCSIWMODE 0x8B06 /* set operation mode */ #define SIOCGIWMODE 0x8B07 /* get operation mode */ #define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ #define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ /* Informative stuff */ #define SIOCSIWRANGE 0x8B0A /* Unused */ #define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ #define SIOCSIWPRIV 0x8B0C /* Unused */ #define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ #define SIOCSIWSTATS 0x8B0E /* Unused */ #define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ /* SIOCGIWSTATS is strictly used between user space and the kernel, and * is never passed to the driver (i.e. the driver will never see it). */ /* Spy support (statistics per MAC address - used for Mobile IP support) */ #define SIOCSIWSPY 0x8B10 /* set spy addresses */ #define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ #define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ #define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ /* Access Point manipulation */ #define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ #define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ #define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ #define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ #define SIOCGIWSCAN 0x8B19 /* get scanning results */ /* 802.11 specific support */ #define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ #define SIOCGIWESSID 0x8B1B /* get ESSID */ #define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ #define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ /* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit * within the 'iwreq' structure, so we need to use the 'data' member to * point to a string in user space, like it is done for RANGE... */ /* Other parameters useful in 802.11 and some other devices */ #define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ #define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ #define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ #define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ #define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ #define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ #define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ #define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ #define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ #define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ /* Encoding stuff (scrambling, hardware security, WEP...) */ #define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ #define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ /* Power saving stuff (power management, unicast and multicast) */ #define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ #define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ /* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). * This ioctl uses struct iw_point and data buffer that includes IE id and len * fields. More than one IE may be included in the request. Setting the generic * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers * are required to report the used IE as a wireless event, e.g., when * associating with an AP. */ #define SIOCSIWGENIE 0x8B30 /* set generic IE */ #define SIOCGIWGENIE 0x8B31 /* get generic IE */ /* WPA : IEEE 802.11 MLME requests */ #define SIOCSIWMLME 0x8B16 /* request MLME operation; uses * struct iw_mlme */ /* WPA : Authentication mode parameters */ #define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ #define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ /* WPA : Extended version of encoding configuration */ #define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ #define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ /* WPA2 : PMKSA cache management */ #define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ /* These 32 ioctl are wireless device private, for 16 commands. * Each driver is free to use them for whatever purpose it chooses, * however the driver *must* export the description of those ioctls * with SIOCGIWPRIV and *must* use arguments as defined below. * If you don't follow those rules, DaveM is going to hate you (reason : * it make mixed 32/64bit operation impossible). */ #define SIOCIWFIRSTPRIV 0x8BE0 #define SIOCIWLASTPRIV 0x8BFF /* Previously, we were using SIOCDEVPRIVATE, but we now have our * separate range because of collisions with other tools such as * 'mii-tool'. * We now have 32 commands, so a bit more space ;-). * Also, all 'even' commands are only usable by root and don't return the * content of ifr/iwr to user (but you are not obliged to use the set/get * convention, just use every other two command). More details in iwpriv.c. * And I repeat : you are not forced to use them with iwpriv, but you * must be compliant with it. */ /* ------------------------- IOCTL STUFF ------------------------- */ /* The first and the last (range) */ #define SIOCIWFIRST 0x8B00 #define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ #define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) #define IW_HANDLER(id, func) \ [IW_IOCTL_IDX(id)] = func /* Odd : get (world access), even : set (root access) */ #define IW_IS_SET(cmd) (!((cmd) & 0x1)) #define IW_IS_GET(cmd) ((cmd) & 0x1) /* ----------------------- WIRELESS EVENTS ----------------------- */ /* Those are *NOT* ioctls, do not issue request on them !!! */ /* Most events use the same identifier as ioctl requests */ #define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ #define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ #define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ #define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ #define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ #define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) * (scan results); This includes id and * length fields. One IWEVGENIE may * contain more than one IE. Scan * results may contain one or more * IWEVGENIE events. */ #define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure * (struct iw_michaelmicfailure) */ #define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. * The data includes id and length * fields and may contain more than one * IE. This event is required in * Managed mode if the driver * generates its own WPA/RSN IE. This * should be sent just before * IWEVREGISTERED event for the * association. */ #define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association * Response. The data includes id and * length fields and may contain more * than one IE. This may be sent * between IWEVASSOCREQIE and * IWEVREGISTERED events for the * association. */ #define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN * pre-authentication * (struct iw_pmkid_cand) */ #define IWEVFIRST 0x8C00 #define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) /* ------------------------- PRIVATE INFO ------------------------- */ /* * The following is used with SIOCGIWPRIV. It allow a driver to define * the interface (name, type of data) for its private ioctl. * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV */ #define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ #define IW_PRIV_TYPE_NONE 0x0000 #define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ #define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ #define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ #define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ #define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ #define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ #define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ /* * Note : if the number of args is fixed and the size < 16 octets, * instead of passing a pointer we will put args in the iwreq struct... */ /* ----------------------- OTHER CONSTANTS ----------------------- */ /* Maximum frequencies in the range struct */ #define IW_MAX_FREQUENCIES 32 /* Note : if you have something like 80 frequencies, * don't increase this constant and don't fill the frequency list. * The user will be able to set by channel anyway... */ /* Maximum bit rates in the range struct */ #define IW_MAX_BITRATES 32 /* Maximum tx powers in the range struct */ #define IW_MAX_TXPOWER 8 /* Note : if you more than 8 TXPowers, just set the max and min or * a few of them in the struct iw_range. */ /* Maximum of address that you may set with SPY */ #define IW_MAX_SPY 8 /* Maximum of address that you may get in the list of access points in range */ #define IW_MAX_AP 64 /* Maximum size of the ESSID and NICKN strings */ #define IW_ESSID_MAX_SIZE 32 /* Modes of operation */ #define IW_MODE_AUTO 0 /* Let the driver decides */ #define IW_MODE_ADHOC 1 /* Single cell network */ #define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ #define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ #define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ #define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ #define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ #define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ /* Statistics flags (bitmask in updated) */ #define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ #define IW_QUAL_LEVEL_UPDATED 0x02 #define IW_QUAL_NOISE_UPDATED 0x04 #define IW_QUAL_ALL_UPDATED 0x07 #define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ #define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ #define IW_QUAL_LEVEL_INVALID 0x20 #define IW_QUAL_NOISE_INVALID 0x40 #define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ #define IW_QUAL_ALL_INVALID 0x70 /* Frequency flags */ #define IW_FREQ_AUTO 0x00 /* Let the driver decides */ #define IW_FREQ_FIXED 0x01 /* Force a specific value */ /* Maximum number of size of encoding token available * they are listed in the range structure */ #define IW_MAX_ENCODING_SIZES 8 /* Maximum size of the encoding token in bytes */ #define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ /* Flags for encoding (along with the token) */ #define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ #define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ #define IW_ENCODE_MODE 0xF000 /* Modes defined below */ #define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ #define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ #define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ #define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ #define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ #define IW_ENCODE_TEMP 0x0400 /* Temporary key */ /* Power management flags available (along with the value, if any) */ #define IW_POWER_ON 0x0000 /* No details... */ #define IW_POWER_TYPE 0xF000 /* Type of parameter */ #define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ #define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ #define IW_POWER_MODE 0x0F00 /* Power Management mode */ #define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ #define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ #define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ #define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ #define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ #define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ #define IW_POWER_MIN 0x0001 /* Value is a minimum */ #define IW_POWER_MAX 0x0002 /* Value is a maximum */ #define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ /* Transmit Power flags available */ #define IW_TXPOW_TYPE 0x00FF /* Type of value */ #define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ #define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ #define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ #define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ /* Retry limits and lifetime flags available */ #define IW_RETRY_ON 0x0000 /* No details... */ #define IW_RETRY_TYPE 0xF000 /* Type of parameter */ #define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ #define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ #define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ #define IW_RETRY_MIN 0x0001 /* Value is a minimum */ #define IW_RETRY_MAX 0x0002 /* Value is a maximum */ #define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ #define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ #define IW_RETRY_LONG 0x0020 /* Value is for long packets */ /* Scanning request flags */ #define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ #define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ #define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ #define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ #define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ #define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ #define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ #define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ #define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ /* struct iw_scan_req scan_type */ #define IW_SCAN_TYPE_ACTIVE 0 #define IW_SCAN_TYPE_PASSIVE 1 /* Maximum size of returned data */ #define IW_SCAN_MAX_DATA 4096 /* In bytes */ /* Scan capability flags - in (struct iw_range *)->scan_capa */ #define IW_SCAN_CAPA_NONE 0x00 #define IW_SCAN_CAPA_ESSID 0x01 #define IW_SCAN_CAPA_BSSID 0x02 #define IW_SCAN_CAPA_CHANNEL 0x04 #define IW_SCAN_CAPA_MODE 0x08 #define IW_SCAN_CAPA_RATE 0x10 #define IW_SCAN_CAPA_TYPE 0x20 #define IW_SCAN_CAPA_TIME 0x40 /* Max number of char in custom event - use multiple of them if needed */ #define IW_CUSTOM_MAX 256 /* In bytes */ /* Generic information element */ #define IW_GENERIC_IE_MAX 1024 /* MLME requests (SIOCSIWMLME / struct iw_mlme) */ #define IW_MLME_DEAUTH 0 #define IW_MLME_DISASSOC 1 #define IW_MLME_AUTH 2 #define IW_MLME_ASSOC 3 /* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ #define IW_AUTH_INDEX 0x0FFF #define IW_AUTH_FLAGS 0xF000 /* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the * parameter that is being set/get to; value will be read/written to * struct iw_param value field) */ #define IW_AUTH_WPA_VERSION 0 #define IW_AUTH_CIPHER_PAIRWISE 1 #define IW_AUTH_CIPHER_GROUP 2 #define IW_AUTH_KEY_MGMT 3 #define IW_AUTH_TKIP_COUNTERMEASURES 4 #define IW_AUTH_DROP_UNENCRYPTED 5 #define IW_AUTH_80211_AUTH_ALG 6 #define IW_AUTH_WPA_ENABLED 7 #define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 #define IW_AUTH_ROAMING_CONTROL 9 #define IW_AUTH_PRIVACY_INVOKED 10 #define IW_AUTH_CIPHER_GROUP_MGMT 11 #define IW_AUTH_MFP 12 /* IW_AUTH_WPA_VERSION values (bit field) */ #define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 #define IW_AUTH_WPA_VERSION_WPA 0x00000002 #define IW_AUTH_WPA_VERSION_WPA2 0x00000004 /* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT * values (bit field) */ #define IW_AUTH_CIPHER_NONE 0x00000001 #define IW_AUTH_CIPHER_WEP40 0x00000002 #define IW_AUTH_CIPHER_TKIP 0x00000004 #define IW_AUTH_CIPHER_CCMP 0x00000008 #define IW_AUTH_CIPHER_WEP104 0x00000010 #define IW_AUTH_CIPHER_AES_CMAC 0x00000020 /* IW_AUTH_KEY_MGMT values (bit field) */ #define IW_AUTH_KEY_MGMT_802_1X 1 #define IW_AUTH_KEY_MGMT_PSK 2 /* IW_AUTH_80211_AUTH_ALG values (bit field) */ #define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 #define IW_AUTH_ALG_SHARED_KEY 0x00000002 #define IW_AUTH_ALG_LEAP 0x00000004 /* IW_AUTH_ROAMING_CONTROL values */ #define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ #define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming * control */ /* IW_AUTH_MFP (management frame protection) values */ #define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ #define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ #define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ /* SIOCSIWENCODEEXT definitions */ #define IW_ENCODE_SEQ_MAX_SIZE 8 /* struct iw_encode_ext ->alg */ #define IW_ENCODE_ALG_NONE 0 #define IW_ENCODE_ALG_WEP 1 #define IW_ENCODE_ALG_TKIP 2 #define IW_ENCODE_ALG_CCMP 3 #define IW_ENCODE_ALG_PMK 4 #define IW_ENCODE_ALG_AES_CMAC 5 /* struct iw_encode_ext ->ext_flags */ #define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 #define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 #define IW_ENCODE_EXT_GROUP_KEY 0x00000004 #define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 /* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ #define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ #define IW_MICFAILURE_GROUP 0x00000004 #define IW_MICFAILURE_PAIRWISE 0x00000008 #define IW_MICFAILURE_STAKEY 0x00000010 #define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) */ /* Bit field values for enc_capa in struct iw_range */ #define IW_ENC_CAPA_WPA 0x00000001 #define IW_ENC_CAPA_WPA2 0x00000002 #define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 #define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 #define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 /* Event capability macros - in (struct iw_range *)->event_capa * Because we have more than 32 possible events, we use an array of * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ #define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ (cmd - SIOCIWFIRSTPRIV + 0x60) : \ (cmd - SIOCIWFIRST)) #define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) #define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) /* Event capability constants - event autogenerated by the kernel * This list is valid for most 802.11 devices, customise as needed... */ #define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ IW_EVENT_CAPA_MASK(0x8B06) | \ IW_EVENT_CAPA_MASK(0x8B1A)) #define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) /* "Easy" macro to set events in iw_range (less efficient) */ #define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) #define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } /****************************** TYPES ******************************/ /* --------------------------- SUBTYPES --------------------------- */ /* * Generic format for most parameters that fit in an int */ struct iw_param { __s32 value; /* The value of the parameter itself */ __u8 fixed; /* Hardware should not use auto select */ __u8 disabled; /* Disable the feature */ __u16 flags; /* Various specifc flags (if any) */ }; /* * For all data larger than 16 octets, we need to use a * pointer to memory allocated in user space. */ struct iw_point { void *pointer; /* Pointer to the data (in user space) */ __u16 length; /* number of fields or size in bytes */ __u16 flags; /* Optional params */ }; /* * A frequency * For numbers lower than 10^9, we encode the number in 'm' and * set 'e' to 0 * For number greater than 10^9, we divide it by the lowest power * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... * The power of 10 is in 'e', the result of the division is in 'm'. */ struct iw_freq { __s32 m; /* Mantissa */ __s16 e; /* Exponent */ __u8 i; /* List index (when in range struct) */ __u8 flags; /* Flags (fixed/auto) */ }; /* * Quality of the link */ struct iw_quality { __u8 qual; /* link quality (%retries, SNR, %missed beacons or better...) */ __u8 level; /* signal level (dBm) */ __u8 noise; /* noise level (dBm) */ __u8 updated; /* Flags to know if updated */ }; /* * Packet discarded in the wireless adapter due to * "wireless" specific problems... * Note : the list of counter and statistics in net_device_stats * is already pretty exhaustive, and you should use that first. * This is only additional stats... */ struct iw_discarded { __u32 nwid; /* Rx : Wrong nwid/essid */ __u32 code; /* Rx : Unable to code/decode (WEP) */ __u32 fragment; /* Rx : Can't perform MAC reassembly */ __u32 retries; /* Tx : Max MAC retries num reached */ __u32 misc; /* Others cases */ }; /* * Packet/Time period missed in the wireless adapter due to * "wireless" specific problems... */ struct iw_missed { __u32 beacon; /* Missed beacons/superframe */ }; /* * Quality range (for spy threshold) */ struct iw_thrspy { struct sockaddr addr; /* Source address (hw/mac) */ struct iw_quality qual; /* Quality of the link */ struct iw_quality low; /* Low threshold */ struct iw_quality high; /* High threshold */ }; /* * Optional data for scan request * * Note: these optional parameters are controlling parameters for the * scanning behavior, these do not apply to getting scan results * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and * provide a merged results with all BSSes even if the previous scan * request limited scanning to a subset, e.g., by specifying an SSID. * Especially, scan results are required to include an entry for the * current BSS if the driver is in Managed mode and associated with an AP. */ struct iw_scan_req { __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ __u8 essid_len; __u8 num_channels; /* num entries in channel_list; * 0 = scan all allowed channels */ __u8 flags; /* reserved as padding; use zero, this may * be used in the future for adding flags * to request different scan behavior */ struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or * individual address of a specific BSS */ /* * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using * the current ESSID. This allows scan requests for specific ESSID * without having to change the current ESSID and potentially breaking * the current association. */ __u8 essid[IW_ESSID_MAX_SIZE]; /* * Optional parameters for changing the default scanning behavior. * These are based on the MLME-SCAN.request from IEEE Std 802.11. * TU is 1.024 ms. If these are set to 0, driver is expected to use * reasonable default values. min_channel_time defines the time that * will be used to wait for the first reply on each channel. If no * replies are received, next channel will be scanned after this. If * replies are received, total time waited on the channel is defined by * max_channel_time. */ __u32 min_channel_time; /* in TU */ __u32 max_channel_time; /* in TU */ struct iw_freq channel_list[IW_MAX_FREQUENCIES]; }; /* ------------------------- WPA SUPPORT ------------------------- */ /* * Extended data structure for get/set encoding (this is used with * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and * only the data contents changes (key data -> this structure, including * key data). * * If the new key is the first group key, it will be set as the default * TX key. Otherwise, default TX key index is only changed if * IW_ENCODE_EXT_SET_TX_KEY flag is set. * * Key will be changed with SIOCSIWENCODEEXT in all cases except for * special "change TX key index" operation which is indicated by setting * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. * * tx_seq/rx_seq are only used when respective * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally * used only by an Authenticator (AP or an IBSS station) to get the * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for * debugging/testing. */ struct iw_encode_ext { __u32 ext_flags; /* IW_ENCODE_EXT_* */ __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast * (group) keys or unicast address for * individual keys */ __u16 alg; /* IW_ENCODE_ALG_* */ __u16 key_len; __u8 key[0]; }; /* SIOCSIWMLME data */ struct iw_mlme { __u16 cmd; /* IW_MLME_* */ __u16 reason_code; struct sockaddr addr; }; /* SIOCSIWPMKSA data */ #define IW_PMKSA_ADD 1 #define IW_PMKSA_REMOVE 2 #define IW_PMKSA_FLUSH 3 #define IW_PMKID_LEN 16 struct iw_pmksa { __u32 cmd; /* IW_PMKSA_* */ struct sockaddr bssid; __u8 pmkid[IW_PMKID_LEN]; }; /* IWEVMICHAELMICFAILURE data */ struct iw_michaelmicfailure { __u32 flags; struct sockaddr src_addr; __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ }; /* IWEVPMKIDCAND data */ #define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ struct iw_pmkid_cand { __u32 flags; /* IW_PMKID_CAND_* */ __u32 index; /* the smaller the index, the higher the * priority */ struct sockaddr bssid; }; /* ------------------------ WIRELESS STATS ------------------------ */ /* * Wireless statistics (used for /proc/net/wireless) */ struct iw_statistics { __u16 status; /* Status * - device dependent for now */ struct iw_quality qual; /* Quality of the link * (instant/mean/max) */ struct iw_discarded discard; /* Packet discarded counts */ struct iw_missed miss; /* Packet missed counts */ }; /* ------------------------ IOCTL REQUEST ------------------------ */ /* * This structure defines the payload of an ioctl, and is used * below. * * Note that this structure should fit on the memory footprint * of iwreq (which is the same as ifreq), which mean a max size of * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... * You should check this when increasing the structures defined * above in this file... */ union iwreq_data { /* Config - generic */ char name[IFNAMSIZ]; /* Name : used to verify the presence of wireless extensions. * Name of the protocol/provider... */ struct iw_point essid; /* Extended network name */ struct iw_param nwid; /* network id (or domain - the cell) */ struct iw_freq freq; /* frequency or channel : * 0-1000 = channel * > 1000 = frequency in Hz */ struct iw_param sens; /* signal level threshold */ struct iw_param bitrate; /* default bit rate */ struct iw_param txpower; /* default transmit power */ struct iw_param rts; /* RTS threshold */ struct iw_param frag; /* Fragmentation threshold */ __u32 mode; /* Operation mode */ struct iw_param retry; /* Retry limits & lifetime */ struct iw_point encoding; /* Encoding stuff : tokens */ struct iw_param power; /* PM duration/timeout */ struct iw_quality qual; /* Quality part of statistics */ struct sockaddr ap_addr; /* Access point address */ struct sockaddr addr; /* Destination address (hw/mac) */ struct iw_param param; /* Other small parameters */ struct iw_point data; /* Other large parameters */ }; /* * The structure to exchange data for ioctl. * This structure is the same as 'struct ifreq', but (re)defined for * convenience... * Do I need to remind you about structure size (32 octets) ? */ struct iwreq { union { char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ } ifr_ifrn; /* Data part (defined just above) */ union iwreq_data u; }; /* -------------------------- IOCTL DATA -------------------------- */ /* * For those ioctl which want to exchange mode data that what could * fit in the above structure... */ /* * Range of parameters */ struct iw_range { /* Informative stuff (to choose between different interface) */ __u32 throughput; /* To give an idea... */ /* In theory this value should be the maximum benchmarked * TCP/IP throughput, because with most of these devices the * bit rate is meaningless (overhead an co) to estimate how * fast the connection will go and pick the fastest one. * I suggest people to play with Netperf or any benchmark... */ /* NWID (or domain id) */ __u32 min_nwid; /* Minimal NWID we are able to set */ __u32 max_nwid; /* Maximal NWID we are able to set */ /* Old Frequency (backward compat - moved lower ) */ __u16 old_num_channels; __u8 old_num_frequency; /* Scan capabilities */ __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ /* Wireless event capability bitmasks */ __u32 event_capa[6]; /* signal level threshold range */ __s32 sensitivity; /* Quality of link & SNR stuff */ /* Quality range (link, level, noise) * If the quality is absolute, it will be in the range [0 ; max_qual], * if the quality is dBm, it will be in the range [max_qual ; 0]. * Don't forget that we use 8 bit arithmetics... */ struct iw_quality max_qual; /* Quality of the link */ /* This should contain the average/typical values of the quality * indicator. This should be the threshold between a "good" and * a "bad" link (example : monitor going from green to orange). * Currently, user space apps like quality monitors don't have any * way to calibrate the measurement. With this, they can split * the range between 0 and max_qual in different quality level * (using a geometric subdivision centered on the average). * I expect that people doing the user space apps will feedback * us on which value we need to put in each driver... */ struct iw_quality avg_qual; /* Quality of the link */ /* Rates */ __u8 num_bitrates; /* Number of entries in the list */ __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ /* RTS threshold */ __s32 min_rts; /* Minimal RTS threshold */ __s32 max_rts; /* Maximal RTS threshold */ /* Frag threshold */ __s32 min_frag; /* Minimal frag threshold */ __s32 max_frag; /* Maximal frag threshold */ /* Power Management duration & timeout */ __s32 min_pmp; /* Minimal PM period */ __s32 max_pmp; /* Maximal PM period */ __s32 min_pmt; /* Minimal PM timeout */ __s32 max_pmt; /* Maximal PM timeout */ __u16 pmp_flags; /* How to decode max/min PM period */ __u16 pmt_flags; /* How to decode max/min PM timeout */ __u16 pm_capa; /* What PM options are supported */ /* Encoder stuff */ __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ __u8 num_encoding_sizes; /* Number of entry in the list */ __u8 max_encoding_tokens; /* Max number of tokens */ /* For drivers that need a "login/passwd" form */ __u8 encoding_login_index; /* token index for login token */ /* Transmit power */ __u16 txpower_capa; /* What options are supported */ __u8 num_txpower; /* Number of entries in the list */ __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ /* Wireless Extension version info */ __u8 we_version_compiled; /* Must be WIRELESS_EXT */ __u8 we_version_source; /* Last update of source */ /* Retry limits and lifetime */ __u16 retry_capa; /* What retry options are supported */ __u16 retry_flags; /* How to decode max/min retry limit */ __u16 r_time_flags; /* How to decode max/min retry life */ __s32 min_retry; /* Minimal number of retries */ __s32 max_retry; /* Maximal number of retries */ __s32 min_r_time; /* Minimal retry lifetime */ __s32 max_r_time; /* Maximal retry lifetime */ /* Frequency */ __u16 num_channels; /* Number of channels [0; num - 1] */ __u8 num_frequency; /* Number of entry in the list */ struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ /* Note : this frequency list doesn't need to fit channel numbers, * because each entry contain its channel index */ __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ }; /* * Private ioctl interface information */ struct iw_priv_args { __u32 cmd; /* Number of the ioctl to issue */ __u16 set_args; /* Type and number of args */ __u16 get_args; /* Type and number of args */ char name[IFNAMSIZ]; /* Name of the extension */ }; /* ----------------------- WIRELESS EVENTS ----------------------- */ /* * Wireless events are carried through the rtnetlink socket to user * space. They are encapsulated in the IFLA_WIRELESS field of * a RTM_NEWLINK message. */ /* * A Wireless Event. Contains basically the same data as the ioctl... */ struct iw_event { __u16 len; /* Real length of this stuff */ __u16 cmd; /* Wireless IOCTL */ union iwreq_data u; /* IOCTL fixed payload */ }; /* Size of the Event prefix (including padding and alignement junk) */ #define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) /* Size of the various events */ #define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) #define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) #define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) #define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) #define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) #define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) /* iw_point events are special. First, the payload (extra data) come at * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, * we omit the pointer, so start at an offset. */ #define IW_EV_POINT_OFF offsetof(struct iw_point, length) #define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ IW_EV_POINT_OFF) /* Size of the Event prefix when packed in stream */ #define IW_EV_LCP_PK_LEN (4) /* Size of the various events when packed in stream */ #define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) #define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) #define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) #define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) #define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) #define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) #define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) #endif /* _LINUX_WIRELESS_H */

./Ninja\.